Search the Community

Do these have Oil Filters? Just picked up a new Recon and excited to work on it. Here's the list: 1. Oil /Filter change 2. Gas Drain/refill with Fresh 3. Carb cleaning / Air filter cleaning 4. Troubleshooting: why reverse isn't engaging 5. Troubleshooting: why tail light isn't working. 6. Buy a new seat or cover. 7. Straighten bent front left fender(rollover?) 8. Buy a new battery hold-down strap

I also have a 2007 Honda Recon ES TRX250 I am wondering if the 2007 manual will work for the 2016 as well? I just purchased the 2016 and it didn’t come with a manual. Thanks for the help!

I have a honda recon 250 that i just bought. the compression is around 90 needs to be rebuilt. im getting into rebuilding it took apart the top end no problem except for the cylinder walls. as shown in the pictures. the way the piston sits in the cylinder is if you were sitting on the wheeler the skirt on the piston is left to right. so the wrist pin is front to back. which is where the two marks are in the cylinder. so that means the connecting rod is making the piston slap the cylinder on the wrist pin side which seems like a weird way for the cylinder to be moving. not natural. now the connecting rod has slight play left to right but not up and down. ive talked to a few people they say it might be the roller bearings in the connecting rod where it meets the crankshaft. but the play it has is not that much. im just looking for some more input before i start splitting the case.

I bought a 2003 Recon from a kid that beat it – all plastics cracked etc, When I replaced the rear brake the inside – axle, rear oil - were clean and in good shape, so I think Honda won the kid vs quad battle. It shifts a little clunky (I made the adjustment) and after riding for a while I get a hot friction material smell I wonder if he used the wrong oil and if any damage was done.

Wanting to know if I can put hubs from a recon on a soortrax

When hunting I carry my rifle in a Kolpin or Flambeau case. My old Kolpin case won't fit any of the current mounts - so I made my own for it. The newer Kolpin case mount for the gun boot IV - the loop bracket, carries way to high to suit me. A simple mod fits my Recon TRX250T, and puts the case down along side the footrest. A piece of bedframe angle iron about a foot long, brings the loop way down

1997-2004 Honda Recon TRX 250 Service Manual View File 1997-2004 Honda Recon TRX 250 Service and Repair Manual Submitter oxidized_black Submitted 12/14/2016 Category Honda ATV