Search the Community

I have a 99 Yamaha bear tracker and I have converted the front brakes from drum to disc fairly easy but I cant figure out how to convert the rear with out hacking apart the rear arm. tried to use parts from a wolverine since the rear arms look similar but the caliper mount didn't line up on the bear tracker axle. Can anyone give me any clues or has anyone successfully converted the bear tracker rear brakes. I would even purchase a conversion kit if there is one. Any help on this would be greatly appreciated.

I have a Yamaha beartracker 250 that I can’t seem to get running right i am after replacing the spark plug, carburettor, and the carb boot to the engine when she starts she revs up like mad even when the mixture screw on the carb is fully in when running she pops and stalls and won’t rev up has anybody have any idea what could be wrong with it thanks

I'm new here, so I would like to say "Hello" to everyone and hopefully, someone will be able to point me in the right direction to troubleshoot an issue. Last night I was riding and all of a sudden ATV lost power and shut down. I was able to get it shifted back down to neutral and tried to restart it. Neutral light on, engine cranks, but it will not start. I haven't really looked at it yet to attempt dieagnoses, since it was getting dark and needed to get it pulled back to garage. Any Idea's of where I should start troubleshooting?? Thanks for any and all help!

View File 2001 Yamaha Bear Tracker Full Service Manual Figured I would share what I had. This really helped me out. Tinkering with my wife's atv now, so Looking for a 96 Polaris Xpress 300 service manual, preferably a free download. Submitter Steve1981 Submitted 09/29/2018 Category Yamaha ATV  

Power on turns over no spark. I replaced the coil, still no park . I replaced the cdi box no spark . I replaced the stator and pickup .no spark. PLEASE TELL ME MY PROBLEM

So we have a 2000 BearTracker 250cc. We got hit by a tornado and it got flooded out. Water was well over the handle bars and it actually moved almost 40 yards by the water. Anyway, I've pulled the carb and drained the tank. New fuel and a "clean" carb. It fires right up first crank like it used to but bogs down after you try and give it any gas. Think it could still be a carb issue? Carb had a fresh rebuild in April and might have 10-12 hours on it since. After we got it out, It was never started until I took the carb off and cleaned it along with draining the tank. Carb has now been off twice with no differences. Any other ideas? also the water seems to never end in the exhaust. I've gotten out as much as I could but it's still steaming quite a bit like there's more in there. Could this be the problem? I've never had an ATV get flooded out like this one before. Any help or other ideas would be great. Thanks yal.

Hi All, i have a yamaha beartracker which is not charging and I'M looking to test the elecrical output fom the stator/rotor to check if all is well in that department. just wondering if anyone can tell me what readings for voltage/current I should be getting if the electrics are healthy? also could some one direct me to a wiring diagram on the net or post one if possible? Any help would be greatly appreciated. Regards Chrisok1