Ajmboy

Did you ever get this fixed? So it shows in H but never gets our of L?

Sounds like you replaced a lot of parts and it sounds like its running out of fuel. Did you test spark on high idle? Maybe a faulty coil?

I would use MAF sensor cleaner as its less abrasive, safe for plastic. Its similar to electrical cleaner. Something like:

I would think 88-90 or 92 would work. But I would check around online. Look at the parts houses and compare some of the parts diagrams. Are you looking for used that you want to know what range of years would work?

Welcome! Chinese quads can be affordable and cheap to repair but sometimes there's limited support from manufacturers and parts are just "Chinese" and by CC. You can find a lot of parts on Amazon for Baja Wilderness quads. We do have a service manual in our downloads section which may help:

Did the entire gauge start flashing? Can you post that video? If the entire gauge was flashing like when you turn your ignition on or off, there's probably an electrical issue.

Looks like its closed. Here's the listing on rider planet https://www.riderplanet-usa.com/atv/trails/info/new_jersey_02274/ride_cb79.htm

I would never advocate for disabling a safety feature like an airbag, but do understand your concern with all the Takata recalled airbags. Vin # check https://owner.ford.com/service/frequently-asked-questions-regarding-takata-airbag-inflator-recalls.html I would first look on youtube to see how yo can remove or disable.

Your posts have all been merged.

Here's a Polaris multiple models manual added by @colin james:

Whats the VIN #? I like using aftermarket personally, but can't answer on the boots. Amazon has those carbs for $40 aftermarket:

Good Morning! Yeah its a little nasty out. My allergies feel even worse considering they should be better with all the rain we've had!

No it’s a pin. I had to take my ball off. It’s my neighbor’s rake. The house with the Stonehenge rocks. The rocks were blasted from the dead end and the developer put them there. We have so much rock and ledge here that we pinned our addition foundation in some parts to ledge. We have the oldest original house on the dead end we bought 12 or so years ago and this last year we put up the addition, so been working on that and doing what I can on my own. In a few weeks I’m going to tackle and try to build a small retaining wall, walkway, flower beds, etc for the front of our house with unilock. We are also still doing interior finishing work. Not hard at all but it has different levels, so if you have it digging deep it’ll pull up rock but will get harder to pull. It also angles like a plow which is convenient. The fill came with so much rock and every time I went over it to grade it more was exposed. I was surprised at how well this rake did and very happy with the results. I seeded the dirt and we put hay on it so hopefully in a few weeks we’ll have grass.

Now with spring here, the wifey and I have been doing some landscaping. Have a good friend that does tree work and helped us grade the land in front of our house by spreading fill/dirt. Was able to get free fill off of craigslist delivered but it contained some rock so needed to rake it out. My neighbor has this cool attachment that works very well. Here's some photos shot during this past week 😋