Skindian82

Kawasaki Lakota KEF300 Engine is the motor and if and when ever I do get it started with starter fluid I wait until it warms up adjust everything on the carb because cold it just seems like it's not getting the Gas it needs.

It's a new carb so float could be off any suggestions on how I can tell and adjust I'm a newbie I did take a part the oem one and cleaned up the jets but I know slim to none about adjusting the float on the new one I'm guessing the oem one is still gummed up somewhere.. so on to continue adjusting the new one.

Gas is flowing to the carb today but won't start spark plug is staying dry even with turning up the gas adjustment and air no change still dry won't even start with the starter fluid...

Sooo this is weird I dialed in the carb yesterday sounding good choke on Idled high choke off idle was good if I reved gas up it would drop down good any ideas

Think I figured it out I feel like a idiot but it happens on my running four wheeler the choke is the opposite way so after I figured that out I am now hoping the carburetor is finally turned in to where it needs to be thanks for the help stay blessed..

Mech if I turn choke on it cuts engine out after warmed up today I used starter fluid and half choke to get it started

no power loss I am using full Choke. When I do get it started I have to smash the gas then adjust the air and fuel but that doesn't seem to help.

Won't cold start if I do get started with starter fluid won't start again later when cools down