Lellwyn Griffin

Anyone had any luck straitening bent racks? Any tips or videos would be appreciated. IMG_0502.HEIC IMG_0503.HEIC IMG_0504.HEIC IMG_0505.HEIC

Does anyone have pictures of when they replaced the rear shock on their Prairie? Did you replace nuts and bolts or use the old ones? Sent from my iPhone using Tapatalk

Both the red wire and the blue have power with out the start button being pushed. Which one should have power? When I hooked up a positive and a negative to the starter relay it started.

It is a wet brake system (I should have mentioned that). Thanks for the tips. I will revisit tonight. Sent from my iPhone using Tapatalk

No I bought it from a guy outside of Birmingham, Alabama. Sent from my iPhone using Tapatalk

I think my rear brakes are stuck. Is these parts in the right position? Any idea how I repair? I have to give it more gas to go and I can't push it when it's in neutral.

Does anyone have a oil preference they like? Lucas, O’Reillys, etc. Sent from my iPhone using Tapatalk

Thanks Frank. Sent from my iPhone using Tapatalk

I need to replace the starter solenoid on a 2000 Bear tracker. The OEM is about $70 and aftermarket ranges between $10-$20. Should I buy the OEM or is there an aftermarket brand that is good?

Thanks for the tips!!! Here is one picture, but doesn’t show a lot. Will post more later. Sent from my iPhone using Tapatalk

What would I look for under the seat? I looked at the air filter and it was new. It has a new battery and has wires connected for a winch. Sent from my iPhone using Tapatalk

Thinking about buy a used 07 Prairie. Any feedback or suggestions on what to look for? Sent from my iPhone using Tapatalk

Pictures would be great. I have circled the fuel hose in green. Sent from my iPhone using Tapatalk

I am looking for pictures of your carburetors, specifically looking for what type and where the hoses go on the red circles. Sent from my iPhone using Tapatalk