Leaderboard

Just a little update for everyone. I traced all the wires repairing any cut wires along the way. The two main power wires from fuse box and the fan wires were cut. The carb heater wires are cut but the harness plug is there. I don't think I need it right now. The starter solenoid wires broke off right at the body of the solenoid with not enough left to repair, new one should be here Monday. Took me a while to find the coil wires as they were under the rear frame cross member. I installed a new coil, ignition switch, multi/shift switch and a battery today and turned the key and the dash lit up! Yes!! The shift indicator was flashing as was the clock. Jumped the solenoid to see if I had spark...nope. Removed the ECU and cleaned all connections and heated it with a heat gun hooked it back up and spark! Poured a little gas into the carb and boom she runs!!!!!!! I did the code check and I am getting code 5 and 11. I am amazed this thing cranked right up. My son and I looked at each other in disbelief, Lol. VID_20250201_185946599[1].mp4