Quantcast
Jump to content

Recommended Posts

Posted

i picked up a 400 ex from a friend of a friend that didnt run. he said he was riding it and then i cut off and would never start back up. Threw a battery in it and when i hit the starter there is no compression in the motor. doesnt really sound like it is even pushing the piston..

So i started with the tear down tonight and made it to getting the valve cover off. First thing im going to check is timing. Just looking at the cam everything looked good but i notice the decompression mechanism is sloppy and loose. The spring and plunger look okay but i can wiggle the whole mechanism and spin it around the cam. Is this normal??

also, anything that i should be looking for right of the bat? im planning on checking timing first just to make sure its in speck and then im going to pull the head off and see if i can see anything else. If nothing then ill pull the jug off and hopefully that will tell all.. Im really hoping i find the problem sooner than that but i have a bad feeling im not going to.:aargh::aargh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
    • By KSIM
      View File CFMOTO C-Force 400 service manual
      C-Force 400
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
×
×
  • Create New...