Quantcast
Jump to content

Recommended Posts

Posted

I got my first quad two days ago, a 93 Yamaha blaster 250. The day after I bought it, a buddy and I were taking it around his grandmas yard in the foot deep snow. After letting it warm up (8 degrees outside) we rode it around for about an hour, stalled a few times due to its our first time riding a manual quad. I went into a snow bank and the quad stalled, I went to kickstart it but it wouldn't tun over, so we moved it to level ground and tried again. No luck, after about 10 minutes of trying to kick it over on and off, it made a weird sound out of the tailpipe, kind of a "pooft" sound, kind of like a small backfire. We looked around the interwebs and assumed it was the packing. Went down to our local yamaha dealer and bought some FMF exhaust packing. (the exhaust that is on the quad now is a DG) We repacked the muffler and reattached it. Went to to kick it over and still the same sound but a little louder. I contacted the guy i bought it off of (a mechanic who Ive known for years and trust) and explained what happened. He said it sounded flooded and to let it sit overnight. I did as he said and tried it again a little bit ago and still the same sound. It sounded like it was going to turn over after about 10 kicks but no luck. I kept the gas off for the first 15 or so kicks to try and burn out the fuel. I have no idea what the problem could be (maybe wrong exhaust packing?) so any input is very welcome!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








×
×
  • Create New...