Quantcast
Jump to content

Recommended Posts

Posted

Long story short, I have an lt160 with a quad racer swingarm. It needs new front pivot bearings. Whoever swapped the swingarm used pipe and stacks of washers to space it but it still seemed to have quite a bit of play. My question is how would I go about spacing it more "legit"?. It's just going to be a beater for around the farm but I don't want it totally cob jobbed. From the looks of it, it's just a matter of aligning it, measuring and finding something to shim the gaps. Correct me if I'm wrong or if there's a better or proper way to go about this. Also not sure what I would use for spacers. Any help/tips would be appreciated. Thanks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By Ethan7387
      Hi could someone please help me, not to sure what engine this is 


    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
    • By hfrost112
      Hello im new Here im having a no spark issue with my 1987 suzuki lt230e with a no spark condition
×
×
  • Create New...