-
Similar Forum Topics
-
By jhamrick75
If anyone is having issues with the Mikuni VM24SS carb, I thought I would post what issues I had and how I resolved them.
Acquired a 93 Bayou 220 that had sat for over 4 years.
The carb was extremely corroded and pitted and full of leftover fuel.
Cleaned carb and bowl and was able to get the engine to start.
Within 30 seconds exhaust would heat up and start to glow red hot.
Removed carb and recleaned everything, including a second overnight soak.
Needless to say, after removing the carb for the 5th time and my frustration to the limit I
realized that my attention had been to the carb body and not to the bowl.
There is a small brass rod on the bottom of the carb that goes down into the float bowl but is seperated from the main section. I had cleaned that area very well....I had thought.
***The corrosion had sealed off the channel that runs from the main bowl section to the small tube section on the side of the float bowl. No amount of carb cleaner was going to get it to budge. So i took a small nail and started to scrape away the corrosion and was eventually able to dislodge enought of the corrosion that carb cleaner would flow through that channel. ***
I thoroughly cleaned each side of the channel in the float bowl and reinstalled the carb and now the issue of it running lean is gone.
On a second note the fuel mixture screw was a nightmare to remove as the threads had been corroded and wouldnt let the screw come out. I used a little cutting oil and worked the mixture screw in and out until I was able to push past the corroded threads and completely remove the needle. After a couple passes with a tap to clean the threads it is like new again.
Hope this helps if you are having a lean running machine.
-
By Guest
I have a 2022/23 Honda Rubicon, and was wondering if there is an exhaust deflector available. I have a rear basket w/ chainsaw mounts, a winch on the rear, and a hitch. When I am working at the rear of the quad, the exhaust puffs and hits us, while we work. It is quite annoying and wound like to be able to direct the exhaust downward. Is there anything that you know of that would work w/o creating any back pressure that might disrupt the engine? I’ve been searching for something like this, but can only find ones for small engines and silencers that would interfere with the winch.
dave
-
By tater
Hey all, I have a new to me RSX850i that has a lot of exhaust smell in the cab and seems overly loud. I did check the pipes to the can and they seem tight, but you can't see much as they have a heat shield on them. Looking online these machines are loud in the cab to start with, but not too many posts regarding broken pipes and or exhaust smell in cab.
-
By Otter9099
I am new to the area and looking for some areas to ride and explore by atv. Does anyone recomend any trails?
-
-
By Slitzer
Hi,
Thinking about to upgrade with a performance exhaust.
Appreciate tips on brands and where to buy (ship to Europe)
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.