Quantcast
Jump to content

Recommended Posts

Posted

Got two 3 wheelers. One a 85; 250es the other around 83 (not sure the year) 200es. Neither of them are getting any fire. The manual says to test across the two terminal going into the coil to measure the resistance. I checked and both read 0.0. No resistance. The 200 came with two other coils which Ive never used. Tested them and got 0.0. Ordered one off Ebay for the 250. Came from a cycle shop. High tension wire doesn't look to good. Tested its terminal and it reads 0.0. I also have a 400 Kawasaki 4 wheeler that ran when parked (water cooled with a cracked head or sleeve. So it hasn't been used in awhile) I tested its coil. Got 0.0. Im pretty sure that coil is good. I then tested a round can coil on my old tractor just for fun. It did show some resistance.

So where do I go from here? I need to find out if that coil from Ebay is bad so I can send it back. The high tension wire on it is just about enough to make me want to send it back any way. Any help on how to test these coils would be appreciated. Then I could move onto the other parts of the firing system.

Posted

I see a post below where the guy with a firing problem was referred to a 3 wheeler site. I went there and tried for two hours to try to figure out how to post. Never did. My question though is pretty genetic. I could had been asking the same question about a 4 wheeler. Coils are basically the same. If anyone can help, Id appreciate it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By leecon
      WANTED MAIN CONTROL BOX/BRAINS for a 2014 Titan UTV Scout E2.
    • By KSIM
      View File CFMOTO C-Force 550 (CF500AU) service manual
      CFMOTO C-Force 550 (CF500AU) service manual
      CF500AU-6L-РУКОВОДСТВО ПО ОБСЛУЖИВАНИЮ-150513.pdf
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
    • By KSIM
      View File CFMOTO CF500-3/UTV service manual
      CF-MOTO cf500 utv service manual
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
    • By KSIM
      View File 2018 CF-MOTO Z-Force CF1000US-2 service manual
      CF-MOTO Z-Force (CF1000US-2) (2018) service manual
      Submitter KSIM Submitted 03/19/2025 Category Other Brands UTV  
×
×
  • Create New...