Quantcast
Jump to content

Recommended Posts

Posted

i have a 2001 quadmaster 500...it will only fire if you pull crank it...but will not with electric start...if u start it with pull crank it will run for like 5 seconds and then quits firing....has a new cdi,new battery,any help would be appreciated.....how do u check the stator?

Posted

yes..it has no spark when using electric start....but ever now and then it does....i went out and tried it 2 days ago....had spark...put plug in fired it up....didnt want to take throttle but it idled about 10 minutes..then just died...quit firing...it was doing this when i bought...guy said same thing...i brought it home..put everything together....it didnt fire...then all of a sudden it ran....that was 2 yrs ago...i put around 200 miles on it since then...now back to same thing like a wiring problem ya know

  • 6 months later...
Posted

Hey Dieseldog, what did you find out on this? My 500 is doing the same thing, I started it yesterday, idled 5 minutes or so while I was doing some other stuff and then just quit. Wont fire, plenty of gas to carb but no spark.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By Arizona
      I recently bought a 87 TRX 250 not running of course, the owner had a brand new Key Switch on it.
      I think it is the wrong one or wrong wire colors as the colors dont match up with wiring diagram i downloaded for it. 
      anyone have a pic of their ign switch wires where they connect with the wire colors for that model? I ended up leaving the black/w stripe and
      green wire disconnected in order to hot wire it for other testing but would like to know as the colors dont match diagram. 


    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
×
×
  • Create New...