Quantcast
Jump to content

Recommended Posts

Posted

(TL; DR - How do I prevent extreme cottonmouth on the mx track? How to take big jumps without flipping and/or wrecking in any way)

Loving these forums. Getting tons of help, so it's on to my next set of questions.

I've only been riding for a couple months. I got comfortable trail riding and decided to hit a nearby motocross track a couple weeks ago. It made me realize really quickly just how old I am, how fat I'm getting, how out of shape I am and how much being a smoker is stupid.

Anyway, my fatness and out-of-shapeness definitely came into play a lot, preventing me from being able to do more than 2 laps at a time without having to take a break. But even worse than that was the immediate dehydration when I hit the track. I drank a lot of fluids and would always take a big swig before I went but within 1 lap, my mouth is completely dry. By the time I'm halfway through my 2nd lap, my mouth feels like I've done the cinnamon challenge. It's seriously unbearable. At first, I assumed it was because of the dust. However, I have a closed facemask while everyone else is wearing goggles, meaning their face holes are exposed to the dust more than mine and they seem to be doing just fine. Maybe adrenaline can cause this issue? Frankly, it was pretty scary my first time out. My question, I suppose, is if there are ways to prevent this. Maybe chewing gum or using one of those camel pack water things?

My 2nd issue is with jumping. My first lap out, I told myself I wasn't gonna jump at all. I ended up hitting a couple jumps too hard and leaving the ground anyway. After a couple laps out, I was getting brave enough to take maybe 8 foot jumps or so. The problem is, the way the track is set up, an 8 foot jump isn't enough to clear the next ramp and land smoothly. You end up slamming into the peak of the next jump instead. Obviously, these tracks are set up to take the big jump or no jump at all. I'm going back out this weekend and I think I'm gonna try my hand at clearing the bigger jumps. I could use some advice, though. The very first jump I did, I instinctually leaned forward on the way up. I almost ended up on the ground with that one. Once I got used to it a bit, I leaned back on the bike a little, which seemed to work better, but I was still hitting some jumps a little crooked, which made for some fairly rough landings. Any advice on jump posture? I'd prefer not to break any bones out there.

Thanks, in advance for the help, folks.

Posted

When i ride at F1 mx track on LI I can't go for more than 3-4 laps without a break. Each lap is about 2 minutes. Lots of gatorade. The more you ride there the easier it will be.

As for jumping you just need more balls and more practice.

Wylde1 is our resident jumper he'll have some tips for you

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Posted

For hydration, I usually start the day before. I drink a lot of V8 Splash and try to avoid anything with caffeine or alchohol. The V8 loads me up with vitamins, minerals, and antioxidants. The day I ride I drink Powerade. I don't ride at tracks, I only trail ride so I am not sure on your times, but usually my day is about 4 to 5 hrs. That consists of not only some hard trail riding, but I will usually spend about an hour or so digging out some jumps. I will drink a 32 ounce powerade before I ride. After I am done digging I drink a Monster Energy ReHab. When I am done my ride another Powerade.

On to the jumps. I ride by myself. On the trail I look for anything that I can get lift off of. My favortie jump I use, I dug out myself and use some old tires someone was nice enough to leave behind on the lip to give it some extra spring. When I am jumping I start out slow and work my way up. I might hit the jump 10 or 15 times before I even take a hand off of the bars. If I don't like the way it throws me or the way the quad is flying,I maight not even hit a trick that day. This is why I ride alone. Noone wants to watch me dig for an hour and then just keep hitting the same jump. On the track the best way to do it is WATCH THE OTHER RIDERS. What gear are they in? How does their motor sound? Is it pinned or mid throttle? Where are they positioned on the bike? If you can watch someone that is making the jump, get on the track with them. You can follow them at a safe distance, keeping speed with them and if they make it you will too. Also don't be afraid to ask someone at the track. "Hey what gear are you hitting that in?" Most guys are more than willing to help out. Also remember, if the other guy is on a modified 450 and you are on a clapped out 250....well you will need a different gear and a lot more pinned.

Now my most important advise. If you are gonna be jumping, use the proper safety gear. I always wear my helmet, goggles, riding pants, chest protector, elbow pads, knee/shin pads, riding boots, gloves, and a neck collar. This is some footage from my last ride where I did a little sleigh riding on my helmet.

[ame=http://www.youtube.com/watch?v=97_E3k_WyoY]ATV Hits Trees Epic Helmet Cam - YouTube[/ame]

Posted

I greatly appreciate the advice, my friends. When it comes to gear, I really need to step it up. I'm out there in jeans, work boots, a long-sleeved shirt and no armor. Just gloves and a helmet with a facemask.

I've thought about filming the other riders to review how they sit when they hit the big jumps but my girl told me that was creepy. I kinda agree.

My next purchase, though, is definitely body armor. I don't really see the benefit of the pants, boots and jerseys that everyone seems to wear, though. How do special $100 boots protect you? How does a $50 jersey protect you? I guess I just don't get it.

Maybe I'll just try and step up my hydration game. I usually drink a decent sized Gatorade before I get there and then sip on one before I ride. Maybe I need to get up earlier and get more fluids in me. I'll give that a shot this weekend.

And I'll definitely be taking your advice of consulting other riders. I was by myself last time and kept to myself. I suppose it's time I introduce myself and get some help from these guys. There's no shortage of them, that's for sure. I'm just not usually the type to approach strangers to ask them to help me with my newbie issues. That's what the internet is for.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...