Quantcast
Jump to content

Recommended Posts

Posted

Ok, I dug around on here but to no avail. A newbie here so be gentle.

My 01 Kodiak 400, (bought new and fluids seem good) automatic, will slip/jerk if in park on a slope. Shifts and drives fine all the time but just not strong on the parking. So, nothing I cant live with for now but...will it harm anything if I delay repairs? Is it something that can be repaired without it looking like a titanic overhaul and is it typically a high dollar thing?

Thank you much in advance!!

  • 3 weeks later...
Posted

I opened it up and just from looking at it seems fine; not sure what the actual measurement needs to be or how tight it should be at rest. There is also a five spoke looking thing over the front clutch portion that does not seem to want to come off. Now, if it is not the belt, where would I start to look next? Thanks!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BigJohn85344
      Hi! I’m new to the forum. I have several Polaris Trailboss 500’s, which I’m trying to make 2 usable bikes from. One is all but complete, needing only reassembly, while the other two are a decision as to which is parts and which is bike. lol. Anyhow…
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
    • By KSIM
      View File CFMOTO C-Force 400 service manual
      C-Force 400
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
×
×
  • Create New...