Quantcast
Jump to content

Recommended Posts

Posted

My son has an 03 kawasaki mojave ksf 250 and the thing idles fine and starts right up but when you start off in first gear the thing brakes up and spits and sputters till your moving I noticed that as soon as you are off idle it is fine,I cleaned the carb and gas tank but still no better any IDEAS?

  • 2 weeks later...
Posted
Did the plug take care of it, then?

I tried the plug but no luck but I had a friend take a look at the carburator and he said there were a lot of hands in the carb before I got it and that the jetting was wrong and parts were missing he was surprized it ran at all so I am having someone who knows what they are doing to work on the carb cause I have no clue when it comes to carbs and jetting

Thank you for your help

  • 5 weeks later...
Posted

Hi all, I'm going to change the oil in the engine just did not know how many gallons pour. Do you know how much you can pour liters of oil into the Kawasaki KSF 250?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

×
×
  • Create New...