Quantcast
Jump to content

2007 Kawasaki Brute Force 650 - Oil Leak

SENECA650

By SENECA650
in Kawasaki ATV Forum

 Share

Recommended Posts

CK1999_400ex Veteran

CK1999_400ex

Posted
Posted

i have a couple of the kawasaki V-Twins and they have some oil seapage from the valve covers and the valve adjustment covers ... the oil runs down the heads and lays ware the head gasket is and looks like its leaking at the head gaskets ... i just cleaned 1 of mine with a power washer and engine de-greaser and then started it up afterwards and didnt see any leaks ... let it run for about an hour (riding around the yard and idleing ) and then found the leak at 1 of the valve adjustment covers .. replaced the O-ring there and no more leak... i have owned several of the V-twin kows and that is ware they usually always leak.. try what i did and see if that i ware its coming from .. most likely will be ..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Coyote251
      2008 Brute Force 650, clutch is slow to engage
      By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • BuckBilly
      Where you like to ride and what riding does for you?
      By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • Mhatayas
      Oil leak 1985 suzuki 250
      By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • RussB
      2007 DS250
      By RussB
      Flywheel puller. Does anyone have the size as the part #529 036 049 is non existent
    • DPDISXR4Ti
      2003 Kodiak Leaking fuel from drain hose at bottom of carb
      By DPDISXR4Ti
      I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
      The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
      Thanks...

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...