Quantcast
Jump to content

Recommended Posts

Posted

--------------------------------------------------------------------------------

i have a 95 bayou 220 not sparking. i have measured all of the connectors on the cdi and most are within the manuals ranges. but there are a couple that measured alot higher than their given ranges. does this indicate the cdi is bad ?

Posted

ok was you meaning the exciter coil and the pickup coil? if so i checked resistance on both and here is what i got. exciter in manual said between 100 - 190 and i got 133, the pickup said between 85 - 130 and i got 114. when i was checking resistance in the cdi it was mostly the blue wire paired with other wires that was giving off alot higher readings and the blue wire comes from the pickup coil. any idea what else i might try ?

Posted

unfortunately not, it would be nice though because i really don't want to pay for another one and then find out that is not the problem. i already bought another ignition coil and sparkplug and neither of those fixed it. is there any other way to test the cdi besides just measuring resistance?

Posted

I need help on a 2006 Artic cat 400 fis 4x4 automatic no spark I need to know the ohms that the trigger should have , I have replaced the spark plug,coil,battery,and rewound the magneto ...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By oxidized_black
      these are what i have in my collection ... always looking for more
      1985 - 1995 Polaris All Models service manual
      1996 - 1998 Polaris All Models service manual
      1996 - 2003 Polaris Sportsman & Xplorer 500 service manual
      1996 - 2003 Sportsman 400 & 500 ~ Xplorer 500 service manual
      1999 - 2000 Polaris All Models service manual
      2001 Polaris 90 service manual
      2001 Polaris Scrambler 50 ~ 90 Sportsman service manual
      2001 Polaris Sportsman 500HO Parts Manual
      2001 Polaris Sportsman 500 Parts Manual
      2002 - 2003 Polaris Sportsman 600 & 700 Servive Manual
      2002 Polaris Sportsman 700 service manual
      2003 - 2005 Polaris Magnum 330 service manual
      2003 Polaris Predator 500 service manual
      2003 Polaris Predator Parts Manual
      2003 Polaris Trail Blazer 250 service manual
      2003 Polaris Trail Boss 330 service manual Part I
      2003 Polaris Trail Boss 330 service manual Part II
      2003 Polaris Trail Boss 330 service manual Part III
      2004 Polaris Predator 500 Owner's Manual
      2004 Polaris Sportsman Owner's Manual
      2005 Polaris 400 & 500 Sportsman service manual
      2005 Polaris 700EFI Owner's Manual
      2005 Polaris 800EFI Owner's Manual
      2005 Polaris Sportsman 400 Parts Manual
      2005 Polaris Sportsman 500 Parts Manual
      2005 Polaris Sportsman 6x6 Owner's Manual
      2005 Polaris Sportsman 700EFI & 800EFI service manual
      2005 Polaris Sportsman 800 Twin EFI Parts Manual
      2006 - 2007 Polaris Outlaw 500 service manual
      2007 Polaris 700 800 800x2 EFI service manual
      2007 Polaris Ranger 700EFI 6x6 Parts Manual2007 Polaris Ranger 700 4x4 & 6x6 service manual
      2007 Polaris Ranger XP 4x4 service manual
      2007 Polaris Sportsman 450 & 500EFI - 500X2EFI service manual
      2007 Polaris Sportsman 700 800 - 800EFI service manual
      2008 Polaris Sportsman 500EFI & 500x2 service manual
      2008 Polaris Ranger 6x6 700EFI Parts Manual
      2008 Polaris 800 RZR service manual
      2008 Polaris Sportsman 700x2 - 800EFI - 800 Touring service manual
      2009 Polaris 850HD EPS service manual
      2009 Polaris Outlaw 450 & 525 service manual
      2009 Polaris Outlaw 90 service manual
      2009 Polaris Predator 50 service manual
      2009 Polaris Ranger 2x4 service manual
      2009 Polaris Ranger 4x4 Crew service manual
      2009 Polaris Ranger 500 2x4 service manual
      2009 Polaris Ranger 500EFI 4x4 service manual
      2009 Polaris Ranger 500EFI 4x4 service manual
      2009 Polaris Ranger 700 4x4 Crew service manual
      2009 Polaris Ranger 700 4x4 service manual
      2009 Polaris Ranger INTL service manual
      2009 Polaris Ranger RZR 170 service manual
      2009 Polaris Scramber 500 service manual
      2009 Polaris Sportsman 300 & 400HO service manual
      2009 Polaris Sportsman 450 & 500X2 service manual
      2009 Polaris Sportsman 500 service manual
      2009 Polaris Sportsman 6x6 800 service manual
      2009 Polaris Sportsman 800EFI & 800EFI service manual
      2009 Polaris Sportsman 550XP service manual
      2009 Polaris Sportsman 850XP service manual
      2009 Polaris Trail Boss - Trailblazer 330 service manual
      2010 Polaris Ranger RZR S service manual
      2011 Polaris Ranger RZR S service manual
      2011 Polaris Ranger RZR SW service manual
      2012 Polaris Sportsman 400 service manual
       
      Visit the Polaris service manual Section: https://www.quadcrazy.com/files/category/7-polaris-atv/ 
    • By neilroy87
      I have a 1990 Bayou 220 that runs pretty well for it's age--needs a new muffler, but sounds tough.    Have had to start with a pull cord since I got it, and recently started troubleshooting the start button.  Finding a lot of information on this issue in the forum, but haven't been able to chase it down yet.  Got a new battery, new starter solenoid, and going to replace the starter relay this week, but not convinced that's going to do the trick, since I can't get the neutral light on when turning the key on.  I can start it by jumping the solenoid, but the 2 black wires to the relay do not activate the starter.  Bad ground or a short somewhere?  Is there a good way to just test the ground?
    • By sugrbuzz
      Looking for a service/owners manual PDF
    • By kaidella
      Bought 4 wheeler for kids. Used to run and soon as it was put in gear it died. I have put new carburater, new plug and battery. The neutral light won't come on. I replaced the solenoid, then the positive battery cable and today put new relay assembly on. Still no neutral light. Not getting any juice and I don't know why.
    • By jhamrick75
      If anyone is having issues with the Mikuni VM24SS carb, I thought I would post what issues I had and how I resolved them.
      Acquired a 93 Bayou 220 that had sat for over 4 years.
      The carb was extremely corroded and pitted and full of leftover fuel.
      Cleaned carb and bowl and was able to get the engine to start.
      Within 30 seconds exhaust would heat up and start to glow red hot.
      Removed carb and recleaned everything, including a second overnight soak.
      Needless to say, after removing the carb for the 5th time and my frustration to the limit I
      realized that my attention had been to the carb body and not to the bowl.
      There is a small brass rod on the bottom of the carb that goes down into the float bowl but is seperated from the main section. I had cleaned that area very well....I had thought.
      ***The corrosion had sealed off the channel that runs from the main bowl section to the small tube section on the side of the float bowl. No amount of carb cleaner was going to get it to budge. So i took a small nail and started to scrape away the corrosion and was eventually able to dislodge enought of the corrosion that carb cleaner would flow through that channel. ***
      I thoroughly cleaned each side of the channel in the float bowl and reinstalled the carb and now the issue of it running lean is gone.
      On a second note the fuel mixture screw was a nightmare to remove as the threads had been corroded and wouldnt let the screw come out. I used a little cutting oil and worked the mixture screw in and out until I was able to push past the corroded threads and completely remove the needle. After a couple passes with a tap to clean the threads it is like new again.
      Hope this helps if you are having a lean running machine.
×
×
  • Create New...