Quantcast
Jump to content

Recommended Posts

Posted

hows it going, my name is Brad and i recently bought a quadsport for 200 dollars i knew there was problems with it when i bought it but my dad and i are stumped at what the problems with it could be having owned multiple 4 wheelers

it burns oil and i knew that when i bought it, pure white smoke screen when i go down the trail its quite fun to smoke people out but its really starting to get on my nerves, my dad thinks it could be the rings but i have yet to tear it apart and see i want a second opinion before i waste my time doing it

it doesent idle at all, i have to keep on the gas when i start it up (if it even will start up its a pain to start) it almost seems like that the carb is clogged or something, the guy that owned it before me put some shitty supertrapp pipe on it and i think it also might have something to do with it im about to take the torch to it and cut the stupid thing off cause he welded right to the header pipe and run a straight pipe cause ive had no luck on trying to find a stock pipe for it.....the spark plugs come out nasty and carboned up like hell, doesent even idle with the choke on it

when i do get to ride it it sounds like its almost backfireing and like its bogging down but it feels like it should be putting out more power than it should dont get me wrong when i get up to the 4th or 5th gear it runs perfectly when i keep on the gas, its fun to ride but id like it to be able to atleast idle cause it sucks when i have to stop and keep reving it

any replys/advice would be greatly appreciated thank you

Posted

thank you for all the replys lol, i was afraid of it being that, oh well it will give me something to do this week. i just cant let this classic go down the drain like this plus it was only a 200 dollar investment so far...keyword being so far

we will see what happens in the next few days lol

and thank you for welcoming me oxidized

Posted (edited)

yeah i figured id still come out on top of it whatever i put into it, i dont think rings are that much and i might a well rebuild the carb while im at it, my jets on it are clogged and the rings are very badly worn on it my dad started without me this morning xD

http://www.ebay.com/itm/Suzuki-Quadsport-230-230S-Top-End-Gasket-Kit-Engine-Motor-Gaskets-Set-/350507163139

thats what id be needed right? or should i go straight for a wisco rebuild kit that comes with a piston which i think i might do anyways, the piston on it is not very bad id say its still pretty good for being that old its not scared to all hell either like some of the ones ive worked on

Edited by riotpolice
Posted

Check the bore size of the jug and see how close it is to the size of the pistion. also check the jug for taper. You might need to put in an oversized piston if the jug is worn bad enough. Just another tidbit of info. I agree with ox too, carb re-build would be a good idea.

Posted

the carb got rebuilt today i havent finished doing the top end yet because i had to go put my dog down today, gonna take a day off tommorow and go up to the cabin to keep my mind busy, i forget how much pets are a family member and how hard it is to lose one so suddenly

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By P_syko
      What oil does everyone like to run in the older quads? 
    • By P_syko
      Does the 1987 moto 4 350 have a low oil sensor that kills spark? Or are these too old for that kind of thing? 
×
×
  • Create New...