Quantcast
Jump to content

Recommended Posts

Posted

My ATV only starts when in full choke even after I let it warm up and ride around I try to lower the choke but will end up stalling. I just put seafoam in the gas tank and will try that out first in about 15 min. I'm just worried that when it gets cold I'll have issues. Also, when I try to lower the choke after being warmed up I hear no difference in the idle. Is there a way to adjust this?

Side question, when I do stall and im in gear its hard to go back into neutral to start it up again. I tried rocking back and forth but that didnt work. After 3 min it went into neutral smoothly.

Posted

First Welcome to Quad Crazy.

I would check and make sure you have the airbox lid on properly and there are no leaks from there to the carb. Then check the tank and make sure your fuel filter is not plugged or the bottom of the tank. Sometimes on plastic tanks some of the cut plastic can get in the lines and the jets.

The sea foam is great stuff but you really have to run a tank of gas or so before you start seeing the benifits.

Third I would hold off on adjusting the carb until you tried everything else, if it ran fine before then I would just clean the carb and not adjust it. Check the jets and see if they have anything in them.

For your other question, alot of quads have the start in gear feature, try holding the brake (Make sure the brake light comes on) and starting the quad.

Posted
First Welcome to Quad Crazy.

I would check and make sure you have the airbox lid on properly and there are no leaks from there to the carb. Then check the tank and make sure your fuel filter is not plugged or the bottom of the tank. Sometimes on plastic tanks some of the cut plastic can get in the lines and the jets.

The sea foam is great stuff but you really have to run a tank of gas or so before you start seeing the benifits.

Third I would hold off on adjusting the carb until you tried everything else, if it ran fine before then I would just clean the carb and not adjust it. Check the jets and see if they have anything in them.

For your other question, alot of quads have the start in gear feature, try holding the brake (Make sure the brake light comes on) and starting the quad.

Thanks for your reply! Ill wait and see if oxidized has a manual for my year and model and ill start breaking her down.

Thanks again!

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By Panupong Pradchaphet
      I have a Sportsman 450 HO and almost killed my self when loading it on my truck with ramps.  It rolled off the top of the ramps and tailgate and nearly landed on me.  I now want to winch the ATV in to the truck.  My question is are the front side bed tiedowns in my 2011 RAM strong enough to winch to without distorting the hooks or sides of the bed?
    • By Frank Angerano
      So I decided to pick up a small trailer if I could get one for the right price.  I found this one for a few hundred bucks on Craig’s list.  It is  a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good. 
      I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.  
      I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well. 








×
×
  • Create New...