Quantcast
Jump to content

Recommended Posts

Posted

Hello everyone!

Just bought a 250 (or 280) king quad ( or quadmaster) from 1990.

heres a website from which i bought it. cant get the pics from there so just look from there:

Suzuki Quad Runner 250 4 WD 250 cm³ 1990 - Kiiminki - Mönkijä - Nettimoto

Funny thing, the advertisement says quad master, but second pic says clearly King quad on the side of gas tank.

I will be getting this tomorrow after work, have to go 160 kilometers to get it but hope it will be worth it. Seller says that it is not pretty but mechanically everything works.

What should I do after I get it? Was thinking of course to change all oils. Does this one have different space for gear oil and motor oil, or are they the same?

Posted
hello and welcome !!

it looks in great shape, nice find. here's a link for a service manual ... https://www.yousendit.com/download/TEhXQ3Q1Y3k5bEJMWE5Vag

i would change the oil and gas that's in it, top up the front and rear diffs, new plug and air filter ...

let us know how you made out and post some pics ...

Thx, I already downloaded that, found this site after googling service manual for two hours yesterday. After I found your link to the manuals I wanted to be a member :)

Hopefully I can get an oil filter for it before weekend, was meaning to change all oils and test the beast saturday :)

Posted

Clean it really good, check all the bolts and suspension parts for wear. Then make sure the frame does not have any defects. This way you do not have to worry about a tie rod end going out at 60mph when you are trail riding. This may be something you can put off until the winter but I would give it a good look over.

Posted (edited)
Clean it really good, check all the bolts and suspension parts for wear. Then make sure the frame does not have any defects. This way you do not have to worry about a tie rod end going out at 60mph when you are trail riding. This may be something you can put off until the winter but I would give it a good look over.

Thanx for the advice. Have to get around to it. First things first though, i ordered a winch with fitting kit. Advertisement says king guad -91-02. hopefully it should be plug and play for the winch part. electricals are different story of course, but we installed one to Big bear last winter and it went ok. Of course we had to make all the fittings ourselves for the winch.

Does this atv have an oil cooler?

edit. when looking at this picture: http://image.nettix.fi/extra/bikeimg/1367801_1367900/suzuki-quad-runner-1367877_l_38282873f1448522.jpg

with picture editor and looking below the lights, there is a mesh at the front ( this is the place for winch?) and after that there seems to be a radiator, I believe that is a cooler?

If it is a cooler, it doubtfully has a fan. My usage will be at summer mudding and forest riding at slow speeds, maybe light cargo attached, so would cooling be an issue? Is there a cooling fan kit for these quads at affordable price somewhere :)

Edited by blackmoor
adding stuff
Posted

And she is home :) She really is lt-4wdx With oil cooler and fan. Eveything works (shifter levers on top of tank tend to be sticky, was thinking of removing the pin), and seems after she warms up, she wont stay running properly. She tends to choke ith full throttle.

What sould be done? clean the carburetor?

Posted

So i did the pin removal mod. Now she can go diff lock with low range :)

The carburettor problem still exists. We took it out, opend the top and bottom, cleaned pilot needle jet. And we moved the jet one ring up (so she would get more gas). But alas, problem still exists.

Symptoms: If you push the throttle open fast, she dies and sometimes misfires at exhaust. If you open throttle very very slowly she can go ok. No hesitating at fast rpm. Only close to idle, and you CAN control it with choke, keeping choke close to half closed, she tends to go great.

What should I do?

Also if there are any pictured walkthrough on how to get start at any gear. with this chocking problem it is frustrating changing gear all the time when she dies :(

Posted

This thread died...

Well talking to myself then :). Did the start in gear mod by grounding the neutral wire, side effect is that neutral light is on all the time. If anyone has a way to get the neutral light to work like it should AND could start in gear, pleas share your info :)

Opened the carburetor couple of times. We got it working properly by lifting the jet one notch, then closing the pilot screw AND opening it 1 and 1/2 half turns. Hopefully this is now remedied.

Installed bronco 3500 lbs winch too ( on top of the front rack, no other place I ques).

Posted

Hoping to get some replys for these two questions...

1. The foot gear shift does sometimes stay at the lower position when changing down. Could this be remedied by oiling the cable? or by installing a helper spring? I´m thinking exhaust spring from snowmobile attached to top of the shifter and onto the frame. So the spring will rest at shifter center position but will tighten when pushing lever down.

2.The winch is mounted on top of the front rak, but this is not optimal place for it. But there just is no room under lights to install it so Im thinkin, if I cut an opening to the mount, which the cable could run STRAIGHT DOWN from the winch. Then I put the roller thing 20 centimeters down from the winch (at the start of plastic bottom shield). and run the winch rope there. so it would go like this:

Winch

_____ front rack

|

| rope

|

-> winch roller, winch rope comes out from here.

Would this be bad for the winch/quad?

Posted

I don't know a whole lot to help you, but wanted to let you know I learned some from reading your post. You seem to be able to figure things out pretty quick and have it under control. I am looking forward to some pics to see how it is coming together.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

×
×
  • Create New...