Quantcast
Jump to content

Recommended Posts

Posted

I recently got a Kazuma 250 I think. I installed new battery and key assembley its only turning on when its connected to the charger.when it is on it shakes back and forward . It rolls backwards . I try to give it gas but it shuts off . Do I need a new alternator so it will cut on with out being connected to the charger

Also I got some B-12 Carb cleaner and it seemed like it helped a little

****Pictures are on my page I couldn't load them from my phone

ALSO IT BEEN SITTING FOR I DON'T KNOW HOW LONG SO SHOULD I LET IT RUN AND LET THE CARB CLEANER GO THRU THE SYSTEM

Posted

i would try to get it running fairly smooth first and see if you have the same problem with the forward motions. you could check the drive belt in the meantime and see if its worn and/or narrowed with wear. it seems the chinese brands electrical harness and components are not as reliable as the japanese. i would just try and get it running smooth and go from there, and yes, run the carb cleaner thru the carb and hopefully you won't need a rebuild kit or alot of heavy duty cleaning by dis-assembly ...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
×
×
  • Create New...