Quantcast
Jump to content

Recommended Posts

Posted

I have a 2005 Sportsman 700 EFI that I bought new. Recently this past spring, when I would turn the ignition to start it, I would hear a click, but the engine would not start. If I turn the key back to the off position and then try to start it again, it would ususally fire right up.

Over time it has gotten progressively worse. Instead of just getting the click once and then starting, about a month ago, I noticed it might take two or three attempts, getting a click each time. And then on the 4th or 5th time it would start.

This past weekend, when I turned the key, there was nothing, not even a click. After a few attempts, I would get a click when I tried to start it and after a few more attempts it would start.

So I'm posting this today in hopes that someone might have had a similar problem and solution. From looking at some diagrams, replaceable parts would be:

1) Ignition switch

2) Starter Solenoid Switch

3) Starter Unit

4) battery

Before I go and buy any or all of these, where should I start?

Thanks in advance

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By kaidella
      Bought 4 wheeler for kids. Used to run and soon as it was put in gear it died. I have put new carburater, new plug and battery. The neutral light won't come on. I replaced the solenoid, then the positive battery cable and today put new relay assembly on. Still no neutral light. Not getting any juice and I don't know why.
    • By TravisM
      2001 bayou 220 KLF220A
      Need some help putting a new ignition switch on this thing. I'm not finding homes for all the wires. I can hook up the white wire and brown wire, But the switch has a B/W and Solid Yellow wire i can't find a home for, and there aren't any more wires in the vicinity from the harness that match this, except one red wire with a double female end crimped on, and a few B/Y grounds. None of the wiring diagrams i've founder or have been given match.
      I'm also wondering if i have the wrong switch? some switches appear to have 4 wires and other just 2, the Brown wire and a White wire.
      I'm at a loss here. Thanks.
       
×
×
  • Create New...