Quantcast
Jump to content

Recommended Posts

Posted

i have a 05 yfz with a brand new battery. There is an issue with it not starting now. You can hear the cliking noise but no turn over.Battery is charged fully but no start.HELP!!!!!!!!!!! What is the problem or anyadvice to fix and not go broke in the process

Posted

took screwdriver and attempted to jump start and NO DICE! NO SOUND NOT ANYTHING! But will follow the advice given and hopefully progress. The weather is to nice to miss out like this. Plus, my neighbor has a Raptor I want to embarrass real bad.

Posted

Put a meter on the leads and make sure you are at least getting 12v to the starter. If I remember right even when you jump the starter there usally is a spark or something.

Check the ground wire and make sure it has good contact with the frame.

I would pull the starter and directly wire it to a 12v battery and see if I can get it to turn if the above does not work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By fwsamm
      Im aware that this relay needs a positive (+) and a negative (-) to activate the other side. The blue wire is the neutral wire so when in neutral it gets ground. The green wire is from the parking break; when you pull the break in it gets ground (-). however one of those two needs to be neutral so that the positive from kill switch can go to the starter relay. The ground from the starter relay is from the start switch. Which one (neutral or parking break) should have a positive (+) voltage?
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By Dsluder
      I am having an issue with a hs500. I bought it broken and have been trying to get it running. It seems to be starving for fuel. If I put my hand over the intake it will crank but will not run for very long because I'm not able to get the correct airflow with my hand. The things I have done so far are. Replaced the fuel pump, fuel filter, mass airflow sensor, idle air adjuster, fuel injector, cleaned the throttle body, replaced the ecu, and still the same issue. I notice the injector does not spray when removed from the head. I dont know if that is common. 
       
      I am out of ideas on what to do next. I have removed the fuel line from the injector and it is getting plenty of fuel. If anyone has an idea on what could possibly be the issue I would be happy to try anything at this point.
    • By Eisaks777
      hello, i have bpr bombaradier rally 200 2007 which has a lot of gasoline in the oil sump, it is  4 stroke. Has anybody had problem like this and which can be the cause and how to fix it. i rode it today at -2 degrees celcius if it helps.

×
×
  • Create New...