Quantcast
Jump to content

Recommended Posts

Posted

My neighbor who had hip surgery 6 years ago parked his King Quad in a shed and it has not been fired up since that time. He replaced the battery, but could not get the unit to run. He asked me for assistance, so we towed the unit over to my shop. I got the unit running, but could not keep it idling without turning up the the RPMs...and when I tried to drive the unit it seems like it ran out of gas after a couple of hundred yards. I tore the carburetor out...dropped the float bowl and discovered a bug (about the size of a housefly) in the bottom. I removed the bug...cleaned what jets and other components I could, put the unit back together...with the same results. I once again removed the carburetor...have removed the plug for access to the pilot needle adjustment and I am preparing to dunk the whole unit into a can of carburetor cleaner. I cannot get the diaphragm screws loose and was wondering if that would hurt the rubber diaphragm if I just left it on the carb...and what should the pilot needle adjustment be set to. Any help would be appreciated.

Chet

P.S. What should the fuel switch under the gas tank be set to. On-Pri-Reserv

Posted

Take a dremel to and cut a slot across the screws in the diaphragm cover then remove the screws with a straight screw driver.

Set the petcock to pri, this lets fuel flow all the time not just when the engine is cranking.

Posted

Thanks...removed the diaphragm, removed all the jets..soaked the whole carb in carb cleaner...still have a question regarding the setting of the pilot needle adjustment...it is a mikuni 19BE K681...pilot was set at 3 turns out, but the unit still is not idling right...since I removed the plug for cleaning I now have access to that adjustment...any clues

Thanks

Chet

Posted

Thanks...removed the diaphragm, removed all the jets..soaked the whole carb in carb cleaner...still have a question regarding the setting of the pilot needle adjustment...it is a mikuni 19BE K681...pilot was set at 3 turns out, but the unit still is not idling right...since I removed the plug for cleaning I now have access to that adjustment...any clues? Float is not sticking.

Thanks

Chet

Posted

Chet, Thuds4evr here.

I have been following your post and am wondering if you solved the idling problem .

I am new to the forum, do not know that I will be able to contribute much as I see the guys in here are a long ways out in front of me on 4 whlrs. It sure is great to see how quick they are to jump in and offer help though. Have been other type forums that this sure was not the case. Tom

Posted
Chet, Thuds4evr here.

It sure is great to see how quick they are to jump in and offer help though. Have been other type forums that this sure was not the case. Tom

isn't that the truth !! this is why i have stayed with this forum too. deleted all the rest :yes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
×
×
  • Create New...