Quantcast
Jump to content

2005 suziki king quad 700/ need motor and transmission

davegbh2o

By davegbh2o
in Suzuki ATV Forum

 Share

Recommended Posts

quadnut20 Grand Master

quadnut20

Posted
Posted
bought 2005 king quad 700. got burnt now need motor and transmission

Details Details more info needed !! most motor problems can be fixed without replacing the whole motor or tranny :yes:Tell us what happened !!

davegbh2o Newbie

davegbh2o

Posted
  • Author
Posted

oil pump chain went through bottom end. oil pump was broke off and made whole bigger where the rod goes through case. and need new crank and piston. and i didn't get to ride it yet. i brought it home put it in garage. was going to take it to have it looked over to see if it need anything, and that is when chain went through bottom end. so took it over too have then look at it and now found all that wrong with it. and more.

quadnut20 Grand Master

quadnut20

Posted
Posted
oil pump chain went through bottom end. oil pump was broke off and made whole bigger where the rod goes through case. and need new crank and piston. and i didn't get to ride it yet. i brought it home put it in garage. was going to take it to have it looked over to see if it need anything, and that is when chain went through bottom end. so took it over too have then look at it and now found all that wrong with it. and more.

Wow !! it gernaded on you !!:no:those motors are usually indestructable !!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Rich1028
      I Crashed My Quad
      By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • kawasig
      I just bought a rare beast!
      By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • P_syko
      Need help! 1987 Yamaha Moto 4 350
      By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • carkivey3
      2008 kazuma 800 4x4. i need wiring help. no spark
      By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • Ethan7387
      Quad engine
      By Ethan7387
      Hi could someone please help me, not to sure what engine this is 


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...