Quantcast
Jump to content

Recommended Posts

Posted

ok well im new to the 450r ive had a 300ex an old big red 3-wheeler and a kawi. mojave 25o(big p.o.s. ever) but my questions about the 450r are prettty simple its got a full fmf exhuast and axle,bearings,sprockets and im not sure what else i got it the way it is but when i ride it when i let off the throttle it pops back thru the exuast im just wonderin if thats cheap gas or supposed to be that way or what its the first quad ive had that actually has some real power and upgrades so im just looking for info lol thanks for th help

Posted

If its not backfiring and its just popping its not really a big deal, and pretty normal. Most 450r's do that, if you really don't like it you can put a richer pilot jet in though. (that's what i did, stopped the popping that i hated so much..)

Posted

thats exactlywhat its doin is poppin once or twice when i let off from high throttle i was just wondering if it was a major problem or not it doesnt really bother me much tho lol.. another question tho i know these 450rs dont really like to run at low seepds and lug around trails but would that couase it to just cut off goin down the trail i was following my buddy and he was riding like a baby haha and my bike kept cutting off i was just wonderin why it was doin that?

Posted

If you are running to lean and putting around on the trails your quad is poss getting the fuel to hot in the carb. My buddies does that. He richened up the air fuel mixture and was fixed.

Posted

Hijacked - What should the EGT be on a Honda 400EX with the a/f mixture set correctly? I have a non contact thermometer I use to find non firing cylinders on diesels. Was wondering if I can use it for my quad.

Sent from my SGH-T959V using Xparent Blue Tapatalk 2

Posted

well heres another problem ive never messed with these kinda carbs and stuff before an i dont wanna mess it up so how wouold i go about goin up one size in the pilot jet and im not even sure what size it is now as i just got the quad the way it is......an side note anyone know who has cheap shorty front fenders lol mine are missing and i whant some shorty ones

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
    • By wheeliewayne
      my  2012 big bear 400 is hard shifting  can anyone help me
    • By hfrost112
      Hello im new Here im having a no spark issue with my 1987 suzuki lt230e with a no spark condition
×
×
  • Create New...