Quantcast
Jump to content

Recommended Posts

Posted

you'll probably have to make something up yourself. you can take a rubber boot matt or old transport truck mud flap and size it to fit and attatch it to the rear rack instead of drilling holes in the plastic. i haven't seen anything online available before. most bikes only need about another 3" on the back fender to elininate the rear wheel spray.

Posted

If it's like my Ltf-500F, all I can say is good luck. There are'nt alot of aftermarket parts for our machines. Quick note, If you do decide to make some homemade flaps keep your tire overhang in mind. Mine failed badly due to the tire actually going past the fender. You'll need to make up some brackets to keep the flaps from being drug on to the top of the rear tires.

If you just want too replace the stockers, they are available but expensive as hell.

Posted

yeah I just need the back two rear mud flaps, I found one and Im biding on it but it is getting high, and also does yalls lt 500 is it hard to shift

Posted
yeah I just need the back two rear mud flaps, I found one and Im biding on it but it is getting high, and also does yalls lt 500 is it hard to shift

What happened to the orignal ones ?

Posted

Hope yah get what yah need, as for shifting I'd suggest a new oil change and filter. Mine was VERY hard to shift when I first got it. I did a few oil changes and got the old dirty crap out of there and it shifts fine now. A little bit of maintinence goes a long way. Get some pics of your ride. I'd be interested to see how the mudflaps on yours are mounted.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
    • By EasyE
      I have just recently gotten a yamaha big bear 350 atv and I think the carburetor is a little off on its setting,bc it cuts out at full throttle and it makes a weird pluff kinda sound 3-4 seconds after I hit the kill switch to shut the atv off. I don't know why it's doing that so any help will be greatly appreciated.
×
×
  • Create New...