Quantcast
Jump to content

2004 Suzuki Eiger JEt KIT????

crotts55

By crotts55
in Suzuki ATV Forum

 Share

Recommended Posts

crotts55 Rookie

crotts55

Posted
Posted

I have a 2004 Suzuki Eiger 400 4x4 manual that i would like to install a jet Kit on. I was told that Its a good idea to jet them when you snorkel them. Im kinda new to the atv game and do a lot of hardcore mudding. so please any suggestions on what brand and what size jet to start out with would be greatly appreciated!

crotts55 Rookie

crotts55

Posted
  • Author
Posted

Thank you. To my understanding you get several different jets in the kit.. is it like a pick and see which one works the best? Or is there guidelines in the instructions?

marioweldinginc Veteran

marioweldinginc

Posted
Posted

There are guidlines in the instructions. Stage 1 is usually just an aftermarket filter and stage 2 is aftermarket filter with open lid and slip on. Each stage has its own jets and adjustments. In between those is minor tweaking and beyond stage 2 involves a plug chop and knowledge of how carbs work and how your settings will effect the a/f ratio.

Sent from my SGH-T959V using Tapatalk

crotts55 Rookie

crotts55

Posted
  • Author
Posted

Okay your opinion here. I have a k+n air filter, stock exhaust and a snorkel kit, and 27" vampires .. do you think a stage 1 dynojet would be a good idea? And would it increase my power noticeably?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Tim Keiper
      2 problems with 2000 Timberwolf 4x4
      By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • AnthonyT
      First time ATV buyer
      By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • 1998Zuki250
      Favorite ATV Tires?
      By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • Ajmboy
      ATV Snow Plow Review, Best ATV & UTV Snow Plows
      By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • Panupong Pradchaphet
      Winch ATV in to Truck Bed
      By Panupong Pradchaphet
      I have a Sportsman 450 HO and almost killed my self when loading it on my truck with ramps.  It rolled off the top of the ramps and tailgate and nearly landed on me.  I now want to winch the ATV in to the truck.  My question is are the front side bed tiedowns in my 2011 RAM strong enough to winch to without distorting the hooks or sides of the bed?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...