Quantcast
Jump to content

Recommended Posts

Posted

got the warrior going today. got chain rollers , rear brakes and chain all put on and working properly, couple more minor things and it will be rip raring ready to play,, WOOOOOO HOOOOO:biggrin: AND TY FOR THE WELCOMES,, HOPE MAYBE WE CAN FIND EACH OTHER SOMEWHERE, SOMETIME, RIDING THE SAME TRAILS

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By jwh
      I am new to this site. Now down to business, I have been given a Kawasaki 220, tires are trashed and it has been setting for a long time. Do I need a battery in it to find neutral? I know there is a neutral switch and if I shift down(7 times????)   then up one using the neutral switch I should be in Neutral. As you see I am in a learning curve here ......coments welcome.
    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • By P_syko
      Which is more reliable? Shaft or chain drive? 
    • By Hakann5336
      Hi my rollers are broken do u know How to remove it and install it

      VID-20250224-WA0009.mp4
    • By KdlH
      Following on from this thread;
       
      I've finally got around to pulling the clutch cover off to have a look at the shifter ratchet mechanism. The screw holding the pinned star wheel has come loose and the wheel flops about. Unfortunately the keyway on the shifter cam has broken on both sides, I found both pieces.
      Anyone had this problem?
      The keyway on the cam "ramps" out, so I'm thinking of making a slightly longer key with a ramp ground into it. I'll put it back together with retaining compound. It may not work but I think it's worth a try.

       

       
×
×
  • Create New...