Quantcast
Jump to content

Recommended Posts

Posted (edited)

Hi, I bought a four wheeler that i believe is a Kazuma. It says 150cc, there is a sticker on the rear left fender that talks about gas, oil, spark plug&gap, it also says the engine family is 7avtxox(by or times) .15nfg. it also says it was made in China and made by chongqing astronautical bashan motorcycle manf. co. ltd. i bought this from a guy in jamestown. i found the ad on craigslist. I am 14 and decieded to buy a atv. mjl01.jpg

Edited by swampcat07
Edited pic link to reflect profile picture. You can not link to your mail program. Try Photobucket or flickr.
Posted

the sticker on the fender says the displacement is 149cc but the sticker on the side of my atv just says 150cc. no other stickers or company names beside who made it on my first post..

Posted

Yesterday i tried to upload a picture of my four wheeler but it just came out as a little box with a red x in it, so i figured out how to upload it as my profile picture so maybe someone seen it before and ould tell me the make and/or model. thanks

Posted

As a first step I would see if you can obtain the original bill of sale/origin from the seller. You will need to get that if you want to register it anyway.

They change body type/style so much it will be hard to tell about your ATV from the pic.

Here is a link for tech service at Bashan.

For technical support, you're requested to send your e-mail to [email protected]

  • 2 weeks later...
Posted

With so many chinese knock offs on the market today it's hard to say what your quad is,,,,but the guy down the road from me sells these and it looks like yours..Hensim brand probably GY6 engine and auto tranny, honda clone engine and parts are easy to get my son had a Carter Talon 150 buggy with that engine and it was a good runner..... :cute:Hensim 150cc Utility ATV Quad

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

    • By Kawasakibayounospark
      any one know much about how this system works. Replaced voltage regulator cid box coil pickup coil have power to cid box none out to coil any thoughts. This is cid box number three 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...