Quantcast
Jump to content

Recommended Posts

Posted (edited)

Not looking to spark any controversy or any arguments. :laugh:

I was thinking about this all day dont ask why.

Ive heard of guys complain about EFI in the new atvs and how carbs keep it simple. wouldnt want their efi module to go out 80 miles deep in the woods. - My 400ex has a carb

Now what about when a front axle actuator gets jammed or the electronics for it crap out. Now that 2 foot mud bog you had to travel through was a piece of cake in 4 wheel drive is now going to kick your as*. - my 400ex is 2 wheel drive. I wouldnt attempt it in the first place.

Coolant leak in the woods or a broken hose? - my 400ex is air cooled.

Melted and broke that CVT belt because you sucked up water into the CVT case? - My 400ex has a clutch.

whining that your 500 dollar instrument cluster isnt covered under warranty cuz you broke it. - My 400ex has a neutral light.

Got too deep and stuck in mud so out comes the winch. They make a 1500lb capacity winch for my 400ex too. plus it weighs only 8 lbs

Your atv is so heavy it needs power steering and wooopsy it breaks deep in the woods. My 400ex has conventional steering. They also make a steering damper and vibration dampening handlebars for it if it gets too rough.

You rolled your 900lb atv and cant get it over? my 400ex is only 375lbs

your starter crapped out? no pull start? my 400ex doesnt have a pull start either but I can push start mine.

Ive seen alot of people say they like to rough it in the woods. How is driving an ATV that is the equivalant of a Cadillac roughing it? Air Ride??? Really? you need an air suspension??

Ill stick with my trusty 03 400EX. Does it break? Yup, but it never left me stranded. Is it crude and optionless - big 10-4 but I dont care. Its simple and trail fast. add a cooler rack for storage and an atv winch and you can go almost anywhere a 4x4 can go. :biggrin:

Edited by marioweldinginc
  • 2 weeks later...
Posted

I look at it this way. Buy the quad that fits most of your needs. If I was a big hunter I would not own my z400. If I like to ride sand dunes and enjoyed jumping and racing on dirt roads and was light enough for my wife to be able to move around the quad, then my z400 would be for me. There is not one quad that will do every thing great. For me the Suzuki fits what I do the most.

  • 2 weeks later...
Posted

well i like my V-force 700 on most of the riding i do .. it doesnt have a chain to ware out and the rear breakd are sealed and dont ware out like the 400ex and it sits higher and has alot more power and is auto so you dont have to worry about if your in the rite gear ... and its only about 100lbs more than the 400ex .. you should try 1 there mario ... you would prolly park your 400ex an never look back...lol

Posted (edited)

I found an new '09 in riverhead. I am going take atrip out there this weekend.

That doesnt mean ill go ahead and get a lazy mans quad BUT the reviews are very high so..

I like the fact that they kept it somewhat light. It is 2 wheel drive but that is quite a large motor

Sent from my SGH-T959V using Tapatalk

Edited by marioweldinginc
Posted
well i like my V-force 700 on most of the riding i do .. it doesnt have a chain to ware out and the rear breakd are sealed and dont ware out like the 400ex and it sits higher and has alot more power and is auto so you dont have to worry about if your in the rite gear ... and its only about 100lbs more than the 400ex .. you should try 1 there mario ... you would prolly park your 400ex an never look back...lol

I have to admit my chain problems stemed from an inferior product and a sprocket change. The factory chain was still on there and worked perfectly.As for rear brakes the 400ex seems to be notorious for eating rear pads but again if my rear brakes go out it wont leave me stranded like a broken cvt belt or if i broke a radiator hose.

I would like to know if anyone has or carries a deadman anchor?

Sent from my SGH-T959V using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By Kawasakibayounospark
      any one know much about how this system works. Replaced voltage regulator cid box coil pickup coil have power to cid box none out to coil any thoughts. This is cid box number three 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
×
×
  • Create New...