-
Similar Forum Topics
-
By DPDISXR4Ti
I hadn't driven my Kodiak for a two months, and since it was low on fuel, the first thing I did was filled it up to maybe 7/8 full. Getting ready to start it, I rotated the fuel selector switch to "on" and within seconds I smelled and saw fuel dripping onto the floor. I quickly turned it off and the fuel gradually stopped - I can repeat this.
The fuel is flowing from the hose that is connected to the bottom of the carb, and routes around to the left side toward the wheel well. Any idea what's going on here? It ran fine the last time I had it out.
Thanks...
-
By mans
Were is the neutral safety switch on 03' Kodiak 400 4x4 . How xan i check it to see if it's good for a no neutral light no power to machine. Ty
-
By Coyote251
View File 2016 Can-Am Outlander 570, 650 & 850 L-Series service manual
service manual - 2016 Can-Am Outlander L-Series
2016 Can-Am Outlander 570, 650 & 850 Standard Series Here is combined the base manual along with all the needed updates and the 2016 supplement manual into one manual
Submitter Coyote251 Submitted 01/03/2025 Category Can-Am BRP ATV
-
By DanOnWD40
Hi guys, so Im i cam across this pretty nice quad. Its a 2003 400ex. Its priced at a little over $1,000. The seller states that it was previously rebuilt and has a hot cam in it. However, it is not firing. He says that it turns over and has spark. He also redid the wiring harness and still couldnt get it to run. I have some experience with quads from previously owning one.
My thoughts are its either something witht he wiring harness(cdi, kill switch...) or it isnt getting the right amount of fuel(needs carb rebuilt) or it's the valves. Or could it be timing? What do you guys think? Let me know!
400EXTurningOver.mp4
I have attached a video so you guys can see how it sounds like. I feel like it wants to start but is missing something...
-
-
By huntindog
I am in the process of puting it back together after replacing the DPS gearbox.
The manual I have states that it will need to be flashed by a dealer. Is this still true?
Also , I have a mystery bolt That I cannot remember where it goes. M6x 70 or so. Hex head with a flat washer.I will try to attach a pic.
Pic is no go for now....Cox issue I will try again later
TIA
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.