Quantcast
Jump to content

2003 Honda 400 EX Rear rims and tires

marioweldinginc

By marioweldinginc
in Honda ATV Forum

 Share

Recommended Posts

marioweldinginc Veteran

marioweldinginc

Posted
Posted

Looking for a tire that would be good for trail riding at RAC in PA.

I would like to have the tires already mounted and looking for the best bang for the buck or nothing too aggressive.

Would the stealer be the most cost effective since I wouldnt have to pay for shipping?

I already have a set of maxxis razrs on there already and not too happy with them (plus less than half tread left)

quadnut20 Grand Master

quadnut20

Posted
Posted
Looking for a tire that would be good for trail riding at RAC in PA.

I would like to have the tires already mounted and looking for the best bang for the buck or nothing too aggressive.

Would the stealer be the most cost effective since I wouldnt have to pay for shipping?

I already have a set of maxxis razrs on there already and not too happy with them (plus less than half tread left)

Razr2 are the best tires $$ can by !! I run them on My 450R

quadnut20 Grand Master

quadnut20

Posted
Posted
so for riding sport quads on trails, the Holeshots or RAZR II are a sure bet just a matter of preference.

Thanks for your help guys!

Not just a matter of preference but experince on the trail !!

quadnut20 Grand Master

quadnut20

Posted
Posted
Ok the stealer said it would be about 300 for a set of razr2 plus 50 to mount them on my rims. Good price?

The hole shots where 90 a piece

Sent from my SGH-T959V using Tapatalk

Stay away from the dealerrships for tires :realmad:Look around on line or local craigslist ( Found a pair of Razr II on rims for 150.00 a few months ago ) and mounting for 50.00 is a ripoff !:yes:

marioweldinginc Veteran

marioweldinginc

Posted
  • Author
Posted

Now I have a new question. the rear rims on my ex are factory 9x8.0 but physically measure 9x9. the offset measures 5"outside and 4"inside. Ive measured several times in different spots.

Which aftermarket size rim should I use to keep it as close to stock as possible. According to the mudthrowers wheel chart I have 9x9" rims. plus I have a 11" x 9" tire on there now. If so why are my rims marked 9x8.0 and did I measure the offset correctly?

If I go with an ITP t-9 in a 9x9, the closest offset they make is 3x6

If I go with a 9x8" rim the offset is closer at 3x5

The tires on there are Maxxis RAZRs 20" x 11" x 9".

The reason Im asking is RMATVMC is cheaper than the stealers here plus I would like to have an extra set of rims/tires if needed already mounted. AM I looking to much into this? If so please smack me

  • 3 weeks later...
marioweldinginc Veteran

marioweldinginc

Posted
  • Author
Posted

OK so now before I go buying a set of tires... Yes another lengthy post... I would like to upgrade to 22" rear tires (20" now)

I plan on getting a renthat 14t front sprocket anyways so that would bring me back to almost factory gear ratio?

Should I go with a 13t instead to give it more low end grunt or 14th and what tooth for the rear?

Im learning damnit!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Gwbarm
      Trail Tire Valve Replacement
      By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • hfrost112
      how to get your tire to seal the bead
      By hfrost112
      whats the best way to seal the bead on a tire
    • BuckBilly
      Where you like to ride and what riding does for you?
      By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • qcm413
      Foreman 500 best mid-mud/winter tire
      By qcm413
      Hi,
       
      i need to replace my tire on my atv and i want to know if somebody have a good tire experience on mid-mud terrain and winter plowing. im not sure if i am to go with a tile like a tractor thread or the other ones like ITP mud lite
      thank in advance 
    • Vlaco
      Wanted to say hello to everyone.
      By Vlaco
      Hi. I just joined the community. I have a sheep farm and use a Polaris 500HO, Polaris 700efi and a JD Gator 825i for different jobs around the farm. I do all the repairs myself so I am sometimes needing some advice and maybe I can be of some help to others as well. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...