Quantcast
Jump to content

Recommended Posts

Posted

I have a 09 quadsport 400. It's only got a few hours on it. I put an aftermarket exghause on it, drove it up and down the street, shut it off and it would not start again! The yellow 5 fuse blew, when I put a new one in it blows too. It controls my starter and all my lights and is connected under the seat to the battery. I tried disconecting the battery thinking it might reset the computer and work but it didn't. Every time i put a new fuse in it blows right away. There are no pinched wires and I've tried everything! Please help me! This is driving me nuts!

Posted

if you are blowing you main fuse then you are shorting directly to ground. it is a process of elimination from there. it will be between the fuse and the part using the power. i would disconect the lights and starter then put in a new fuse. if it does not blow then start slowly connecting the parts back on until the fuse blows thus finding your issue. my gut is telling me that you are shorting through your starter to ground.

Your friendly neighbourhood mechanic.

Posted

you were absolutely right! The best andvice I could have gotten considering I didn't have an electrical tester. For anyone with problems of fuses blowing, get a electrical wire tester!

Thanks for your help!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
    • By KSIM
      View File CFMOTO C-Force 400 service manual
      C-Force 400
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
    • By Kawasakibayounospark
      any one know much about how this system works. Replaced voltage regulator cid box coil pickup coil have power to cid box none out to coil any thoughts. This is cid box number three 
    • By kaidella
      Bought 4 wheeler for kids. Used to run and soon as it was put in gear it died. I have put new carburater, new plug and battery. The neutral light won't come on. I replaced the solenoid, then the positive battery cable and today put new relay assembly on. Still no neutral light. Not getting any juice and I don't know why.
×
×
  • Create New...