Quantcast
Jump to content

Kawasaki KFX 450R Intake

dirtjunkie85

By dirtjunkie85
in Kawasaki ATV Forum

 Share

Recommended Posts

Jonny450R Collaborator

Jonny450R

Posted
Posted

take off all your plastics it'll help alot, be careful with the air sensor on the intake they're known for breaking while removing and re-installing them. It'll also be a good time to double check all the clamps on the intake from the throttle body back making sure there's no tears or other leaks.

dirtjunkie85 Collaborator

dirtjunkie85

Posted
  • Author
Posted

Turned out not to be to bad it is a pretty tight fit but that is a good thing the only thing I dont like about it is everytime you need to clean your filter you have to pull your rear fender and air box but it is worth the power increase, I took it out this week end and it was awesome until I lost all power and the motor started makeing a heck of a nosie rattle and knock I am going to make a new post to see if anyone has any ideas but as far as the intake goes It is pretty sweet now I just got to get my quad running again so I can enjoy it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • pastorjeep
      2001 TRX350TM Rancher Crazy Bad!
      By pastorjeep
      Ok guys, I am a glutton for punishment! I picked up this 01 2wd Rancher because the plastics looked good on the marketplace. It has been sitting in the guys back yard for 10 years. The original engine blew and they swapped in an electric shift 4x4 engine. 😒The engine is locked up and was full of water. The wiring is hacked where they tried to get it to run and the rear end needs new swingarm bearings where they left it laying on the ground in the woods for 10 years. Has anyone here ever did the engine swap? First thing is to straighten out the wiring and get the engine free to see if I can get it to crank over. I have swingarm bearings ordered and a new ignition switch. So hopefully I can at least roll it around soon. 🤣





    • bigd764
      Anyone ?
      By bigd764
      Anyone know what this thing is ?





    • DaleJAM
      what year is my Yamaha i just got ?
      By DaleJAM
      so i cant read the vin clearly but i have added some pictures, hopefully someone sees it correctly. took a picture of what it looks like, they painted it Green It is underside a SKY BLUE original. has one spark plug . 3 relays in the back + rectifier. has one relay in the front. has cdi in the front three plugs off it. 
      If you need more info or pictures please ask. 
      the wire harness is trashed i want to rewire it but correctly. 






    • motox88
      Outlaw Brand Clutch Parts - Any Experience?
      By motox88
      Anyone have bad experience with these clutch kits?  Looking to get one for an 80s quad that I have.
    • p5200
      What kind of oil do you use in your Honda?
      By p5200
      I've been using Valvolene 10w 40 ATV oil but, it's like $8.00 a quart. Is that about the going rate? Or is there cheaper alternatives that would be suitable? Thanks

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...