Quantcast
Jump to content

Recommended Posts

Posted

Hi I'm new to this forum and am searching for help.

I just bought a 2008 Kazuma Jaguar 500 (couldnt pass up the deal for the plow) and when I try to engage the electronic diff lock the ride stalls out flat.

anyone have any ideas? I have not even ran a test light from the switch to the diff yet just brought it home tonight.

thanks

Posted

The only thing that makes sense to me is that you have a dead short in the wiring that powers the diff lock actuator, and it is grounding out the entire electrical system. I would inspect the wiring for damage or signs of tinkering by an idiot.

I am moving your thread to the Kazuma forum.

Posted
The only thing that makes sense to me is that you have a dead short in the wiring that powers the diff lock actuator, and it is grounding out the entire electrical system. I would inspect the wiring for damage or signs of tinkering by an idiot.

I am moving your thread to the Kazuma forum.

Yes I'm on the same page here, sounds like a dead short, I had this problem once. I had broken wires to my ignition. Get busy with a test light, process of elimination, takes time but you'll find it.

  • 7 years later...
Posted

Can you help me with mine and send me a picture of your exhaust port that has hose port and feeds fuel pump, I bought mine and I think Im missing something

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...