Quantcast
Jump to content

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hfrost112
      Hello im new Here im having a no spark issue with my 1987 suzuki lt230e with a no spark condition
    • By Cyndi77
      Hello I just bought my son a 1998 kingquad 300. The brakes do not work but other than that we just want to learn all we can about it.  To keep it up and going.
       
    • By JRW
      Hey all, just posting to introduce and get ball rolling on the required number of posts to download a freakin manual. Recently picked up an 86 LT230S for $800, runs OK and kids having some fun on it so far, but it needs some work. I did an oil and filter change, other than a rough idle it's not bad, ordered some new front tires as those are thrashed, and getting left rear looked at as it has a slow leak and was somehow mounted backwards! Not sure how that happens and nobody noticed. Anyway, yeah sure I'll be posting more specific questions as I get into it, hope to just have it solid enough for kids to rip around at grandpas.
    • By DaveswMN
      Pulled my '86 Moto4 out of shed where it sat for 20 years. I knew it smoked. checked it over a little put in gas and it fired right up!! 
      Drove about 100 yards, ran about half throttle wouldn't idle.  Put on somenew parts, jug/piston and rings, carb and valve seals.
      'went together ok, tuned it over by hand about 6 revs whick went well. Hit the starter it fired for about 6 revs and quit. tried it again fired once and then th sound of something slipping like maybe chain slipping over spoket.
      Took cover off to watch cam sproket, hit starter again, heard same noise and the cam sproket was not turning but jumping a bit. Chain was still tight. You will probably tell me I need to split the lower case but hoping there mightbe something else.
      I don't fully understand the chain tightener, the plunger only moves about 1/4 inch, should it move much more than that when off the motor and compressing it by hand?
      Thanks for any thoughts.
×
×
  • Create New...