Quantcast
Jump to content

Recommended Posts

Posted

I have a 2007 700 EFI that I purchased new. It broke down 9.5 miles out on the trail the day I bought it and has been in the shop in two states almost ever since. All warrenties are now expired and I have a quad that still does not run. I have only managed to put 304 miles on it in 3 years. I am a auto mechanic and have technical back ground. I maintain, repair, and build all my other quads and bikes as well. This one has been under warranty and the princable of it has kept me taking it back to the dealers. Now it's up to me to repair it.

To start out, it is flashing codes 41, 42, and 43. Can anyone give me code descriptions? Thank you.

Larry

Posted

Are you saying that this problem started while the machine was under warranty and has not been repaired? If so, I would contest that it is still up to the dealership to correct the problem. Also, if it has been in more than three times for the same issue and it has been 3 years or less since the original purchase of the vehicle, the "lemon law" may apply. I don't know if the lemon law applies to ATV's or not. I would still contest that this should still be a warranty issue, since the problem started while the machine was under warranty. Did the machine just die, do you know if it is a fuel or an ignition problem?

Posted (edited)
Are you saying that this problem started while the machine was under warranty and has not been repaired? If so, I would contest that it is still up to the dealership to correct the problem. Also, if it has been in more than three times for the same issue and it has been 3 years or less since the original purchase of the vehicle, the "lemon law" may apply. I don't know if the lemon law applies to ATV's or not. I would still contest that this should still be a warranty issue, since the problem started while the machine was under warranty. Did the machine just die, do you know if it is a fuel or an ignition problem?

The problem started 2 hrs after I bought it. We were at the Hatfield McCoy trails in Gilbert W.Va. and had a problem with another Cat and went to a local dealer to get parts. They didn't have the needeed parts, had a great deal on the 700, I had been looking for a new quad, so we still had 2 days of riding planned, I bought it. Headed back to the trails, made it 9.5 miles and it quit. Towed it out of the woods. The dealer was closed for the day at this point. The dealer is 230 miles from my home, took it back the next weekend.

They replaced a rollover sensor. We scheduled another ride when I went to pick it up, same thing.

It went back to them again and they could find nothing wrong.

Took it to the dealer 4 miles from my house, they would not look at it because I did not buy it there. Took it to another 50 miles away, they replace the wiring harness, instrument cluster, and battery as well as breaking several plastic panels and tearing the side up with a dump bucket or something and sade it was all like that when I dropped it off. I called the Sherriff dept and contacted an attorney, nothing could be done that wouldn't cost more than the damage.

It is 5 months old at this point, been at the dealer most of the time.

Meanwhile the company I work for closes down, so I can't afford out of state trips. I am still battling the Dealer I bought it from and the finance company to get a memorandom of title so I can register it in Ohio. ATV's have to be liceised in Ohio to ride. I'm making 1/2 what I used to earn so with money issues and not being able to ride it in Ohio it sat for a while.

Reliezing the extended warrenty is running out I pay it off this spring and get a title so I can ride it. still not fixed. Took it back to both dealers. Only the dealer I purchased it at will honor the extended warrenty. It has never acted up at a repair shop and no further repairs have ever been made.

I know not riding for a while has compounded issues but life happens and throws a wrench in things sometimes.

Buying it in a different State has left me no recoarse as neither states attorney General will help. I have never been able to contact Arctic Cat, can't get a number from anyone. I have talked to, called, written, and emailed, every channel I could find.

I need a new 2 up but all my freinds who have bought ATV's or bikes have went through hoops with dealers and shoddy warrenty work. Honda has been the only standup company out of all the manufactuers. After this experiance, I don't see a another Cat coming home soon.

Now that I bent your ear. It sounds/acts like it is leaning out. Sometimes it runs really bad, backfires, won't rev, other times it just quits. some times it will restart in as little as ten minutes and has taken as long as two weeks to start. I now have all the plastic off and the wiring harness is ok but misrouted and not secured from when it was replaced. I am going to bring my fuel pressure gauge kit home and see if I can T in some where, although it is running fine currently. I am also going to check system voltage. I may install a volt meter and fuel pressure gauge on the quad if nothing shows up.

I have tried to buy a repair manuel but was told by 2 dealers that any repair related material is avalable to dealers only. I have manuels for my Polaris's.

I am 51, have always bought my toys locally and paid cash. I had one warrenty issue on a Polaris once, it was handled well. I do all repairs and maintainess myself once the warrenty is done. This has been a nightmare, from the financing to the title problem to the "it has never ran". I was mailed 3 customer service surveys which I retured with no response.

If Arctic Cat is out there reading this, I would really like to think you guys care about your customer base. I can understand the dealers being the way they are, and I know they can't get good techs because most areas are seasonal and they hire who they can get. But for the company to not even have a way for a customer to get in touch and handle problems is not aceptable. Take a clue from Honda service. My friend marked a midgrade rating on service on his survey and got a call from Honda 2 days after he mailed it and gave him a free service for his time and concerns.

I see manuels are available from members on this sight, I will be purchasing one.

Edited by GTX70sixpack
new information
Posted

I first must appologize for posting code info for a Yamaha Grizzly, I saw 700 EFI in the title and for some reason had Grizzly on the brain. This is a good reason to put complete machine info in your thread title, I will add that for you.

Next, I am nearly certain that the motor in your Cat is manufactured by Suzuki, I don't know if it is a Kingquad clone, but I think they share a motor. The DVX 400 is a nearly exact replical of an LTZ 400. Perhaps a Kingquad repair manual could be of some help. At any rate, I don't know if would help, but you might want to consider contacting Suzuki's customer service and telling them of your issue. Who knows, maybe they will step up and help a guy who obviously got a raw deal. They may atleast be able to give you some advise. Have you contacted any Lemon law attorneys in either state? From the sounds of it, your machine should qualify as a lemon.

My best guess is that your issue is either the CDI or it is an EFI problem, unfortunately as you probably know, an EFI problem could have many causes. Have you tried to determine what is missing when the machine won't run at all, spark or fuel?

  • 1 month later...
  • 10 years later...
  • 6 months later...
Posted

here are some codes from the manual. Also the wiring diagram because I believe multiple codes at once is telling me power to all 3 sensors is interrupted. See wiring diagram attached. Possibilities include bad fuel relay, chaffing fuel power wire, or what I’ve been dealing with on my quad is corrosion of connectors in the ECU plug. 

7ADA83EF-C544-4E46-BB83-F350116B6BC4.png

1629A02A-C399-43A1-B0F6-A7D7F8F4A8BF.jpeg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By P_syko
      Hello all! I’m new to the 4 wheeler world, but not new to the mechanic world. I was a diesel mechanic for many years and last year got into jet skis. I just bought a 1987 Yamaha moto 4 350 and now learning the ins and outs of 2 stroke engines. Looking forward to learning all the things. 
    • By quadcrazy
      View File 1985 - 1995 Polaris ATV service manual (All Models)
      1985 - 1995 Polaris ATV service manual (All Models) 
      Covers the following models:
      1985   Scrambler Trail Boss
      1986   Scrambler
      1986   Trail Boss
      1986   Scrambler
      1986   Trail Boss
      1987   Trail Boss
      1987   Cyclone
      1987   Trail Boss 4x4
      1987   Trail Boss 4x4
      1987   Trail Boss 4x4
      1988   Trail Boss 2x4
      1988   Trail Boss 4x4
      1988   Trail Boss 250 RIES
      1988   Trail Boss 250 RIES
      1989   Trail Boss
      1989   Trail Boss 2x4
      1989   Trail Boss 4x4
      1989   Big Boss 4x6
      1989   Big Boss 4x6
      1990   Trail Blazer
      1990   Trail Boss 250
      1990   Trail Boss 2x4
      1990   Trail Boss 2x4 350L
      1990   Trail Boss 4x4
      1990   Trail Boss 4x4 350L
      1990   Big Boss 4x6
      1991   Trail Blazer
      1991   Trail Boss 250
      1991   Trail Boss 2x4
      1991   Trail Boss 2x4 350L
      1991   Trail Boss 4x4
      1991   Trail Boss 4x4 350L
      1991   Big Boss 4x6
      1991   Big Boss 6x6
      1992   Trail Blazer
      1992   Trail Boss 250
      1992   Trail Boss 2x4
      1992   Trail Boss 2x4 350L
      1992   Trail Boss 4x4
      1992   Trail Boss 4x4 350L
      1992   Big Boss 4x6
      1992   Big Boss 6x6
      1993   2502x4
      1993   3502x4
      1993   2504x4
      1993   3504x4
      1993   Sportsman
      1993   2506x6
      1993   3506x6
      1993   Trail Boss
      1993   Trail Blazer
      1994   3002x4
      1994   4002x4
      1994   3004x4
      1994   4004x4
      1994   3006x6
      1994   4006x6
      1994   Trail Boss 2W
      1994   Trail Blazer 2W
      1994   Sportsman 4x4
      1994   Sport
      1995   3002x4
      1995   4002x4
      1995   3004x4
      1995   Xplorer4x4
      1995   4006x6
      1995   Trail Boss
      1995   Trail Blazer
      1995   Sportsman 4x4
      1995   Scrambler
      1995   Magnum 2x4
      1995   Magnum 4x4
      1995   Sport
      Submitter quadcrazy Submitted 05/24/2018 Category Polaris ATV  
    • By Malta54
      I own a 2007 Polaris Sportsman EFI X2 model and have for the past months been experiencing loads of issues. Basically the Sportsman will only start if the throttle lever is pushed and will not remain on idle. This situation has persisted for months now and I have replaced the following parts:

      Sparking Plug
      Fuel Injector
      Fuel Pump
      Fuel Filter
      Fuel Valve
      Fuel lines
      Power Control Module

      The last part replaced was the Power Control Module and the Sportsman was tested and worked fine on a couple of occasions which were days apart so much so that some weeks later I took the Sportsman for an extensive ride and it worked perfectly. This was three weeks ago and today I tried to start the ATV it worked fine a few minutes and decided to switch it off so that I could continue with some prep work. A few minutes later tried to start it up again but noticed that it would only start if the throttle lever was pushed and once I removed my finger from the throttle lever the engine would not stay in idle and would simply shut down. Several attempts were made to start this and also tried to re-adjust the setting by turning the built in wheel like mechanism in the throttle cable but it was to no avail.

      The above have been repeating itself on an off basis. Each time a part is replaced the ATV would work and then all of a sudden will not keep its idle. At this stage I cannot think of any other solution other than possibly some sensors which might have an intermitting fault but I cannot really say.

      Would greatly appreciate any assistance.

      Thanks in advance.
    • By pepsidude1979
      my cv boot just went today while i was on the trail and thankfully i knew someone with an truck and trailer to tow me home. im just wondering an estimate to replace the cv boot i live in canada and being a long weenend nothing wont be open until tuesday  
    • By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
×
×
  • Create New...