Quantcast
Jump to content

Recommended Posts

Posted

It sounds like a stuck float, worn float stopper, or debris stuck on the float stopper or in the seat. It is still possible that your jets are clogged, but that is not why the fuel is running out of the carb, that is caused by the float stopper not stopping the fuel from entering the carb when the bowl gets full. Check your airbox for fuel, if there is fuel in the box, that is a sign that the main jet is not clogged, at least not completely. When you take the carb back apart to check the float and stuff, take the jets and pilot screw out, shoot some carb cleaner through the jets and the pilot circuit, and then blow through all the holes with compressed air. You may need to use a piece of wire to break things up if the holes are clogged with hardened material.

Posted

If the problem comes and goes, you may be able to give it a quick fix when it acts up by tapping on the side of the float bowl with a screwdriver handle or something. Good luck with it, have fun.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Trent Finnessey
      So I’ve got a 2000 Honda 400ex absolutely love it!! I’ve had it for about a month, I ride with bruteforce 750’s, outlander 850’s and 1000 sxs’s and I was thinking of getting a trx450r carb and a full hmf exhaust. And probably doing the air box mod too, how much power would this give my 400? Just a little different or a big difference? Cuz if it’s not much of a different I’ll just stick with my dg slip on..... thanks!
    • By KSIM
      View File CFMOTO C-Force 400 service manual
      C-Force 400
      Submitter KSIM Submitted 03/19/2025 Category CFMOTO ATV  
    • By Kawasakibayounospark
      any one know much about how this system works. Replaced voltage regulator cid box coil pickup coil have power to cid box none out to coil any thoughts. This is cid box number three 
×
×
  • Create New...