Quantcast
Jump to content

Recommended Posts

Posted

My rear brake linkage become embedded with mud and burned out the rear wet brakes in the differential. I have found the replacement parts but was wondering if anyone has removed the rear differential and can provide some tips. Yes I am sure the plates are shot.

Thanks

Posted

My best advice would be to buy a repair manual. On a newer model like that, your only option may be a factory manual, which are a bit spendy. Other than that look up your model on an online parts fische and you can see an exploded view of the rear suspension and the rear diff itself. That may help in the disassembly and more likely help when you go to put things back together. But without the manual, you will have no torque specs or sequences that are needed to properly re assemble the machine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • By qcm413
      Hi,
       
      i need to replace my tire on my atv and i want to know if somebody have a good tire experience on mid-mud terrain and winter plowing. im not sure if i am to go with a tile like a tractor thread or the other ones like ITP mud lite
      thank in advance 
    • By bigd764
      Anyone know what this thing is ?





    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • By Coyote251
      View File 2016 Can-Am Outlander 570, 650 & 850 L-Series service manual
      service manual - 2016 Can-Am Outlander L-Series
      2016 Can-Am Outlander 570, 650 & 850 Standard Series Here is combined the base manual along with all the needed updates and the 2016 supplement manual into one manual
      Submitter Coyote251 Submitted 01/03/2025 Category Can-Am BRP ATV  
×
×
  • Create New...