Quantcast
Jump to content

Recommended Posts

Posted (edited)

ok i have a 2007 trx450er. when i start the bike with the choke on it will idle. but once i turn off the choke it well idle for 30sec. to a min. then die. ive tried adjusting the idle screw but still does it. help me please

Edited by Ajmboy
Posted

sounds like just dirty from sitting pull off float bowl clean out with carb cleaner squirt some carb cleaner up those little jets that are sticking down where the float bowl was , some times this will get it,if it dont you"ll have to disassemble the carb and clean out those little holes in the jets, i use small number drills some times i use welders thorch tip files if i can find them small enough.

Posted

That is kind of what I was thinking, sounds like your pilot is running a little lean. If the machine sat for a long period, then carb buildup could definately be the problem. If it just started happening all of a sudden, and the machine has not been stored for a long time, I would check for an air leak in the intake track. If you just aquired the machine, or made a significant change in elevetion, I would try adjusting the pilot screw or going to a larger pilot jet.

Posted

:no: ok so i did wat you guys said clean out the carb. put everything back together and it still does the same thing. im confused now. its like when the choke is on it well idle but right when i take it of it well die in like 10 to 15 secs.

idk could it be bad gas?

i made sure i tighted everything.

Posted

If you used gas with ethanol in it, that could cause some issues.

It is not getting enough fuel at idle, if it runs fine when you put the choke on you need to decrease the amount of air going in or increase the amount of gas.

Posted

but its all stock. ive done nothing to change the amount of fuel or air going into it. for got to mention that when the choke is on it idles a lil funny, it well idle high then go down then high then down take choke off then couple secs it dies.

Posted

Also, to answer your earlier question, bad gas could definately be your issue. If it sat for a year, I would definately get rid of the gas, clean the tank and make sure the petcock is clear. There is a screen in the tank that goes over the peckock, make sure that is clean too. When you clean the carb you need to clean EVERYTHING. So you may have missed something when you cleaned it the first time. Also, your choke mechanism itself could be part of the problem, make sure to take it apart and clean it too.

Posted

check plug and clean it,if it still does it ck and see if you have vacume,sprey water around intake and carb that will tell you if it is sucking airalso ck breather if dirty clean it with soup and water let it dry reinstall itif none of that helps you need to clean carb jets,make sure needle valve is not sticking make sure air iset 1.5 to 2.5 turns out if you do all that it will run

  • 1 year later...
Posted

I'm having the same idling problem with my 07 450er and Ives done all the things you have listed above. and it won't idle and pops on deaccelerarion. sometimes it bogs down real bad if I push it anywhere over 3/4 throttle. any ideas?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By RussB
      Flywheel puller. Does anyone have the size as the part #529 036 049 is non existent
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
×
×
  • Create New...