Quantcast
Jump to content

Recommended Posts

Posted

I agree with MWKE, higher octane fuels are really only needed in high performance machines. Regular should do you fine for the most part. The only real benefit it would give you is that it burns a bit cooler.

  • 1 month later...
Posted (edited)

The only thing to watch out for it Ethanol, even 10% can cause problems. In engines which are used infrequently or stored for periods of time ethanol can separate from the gasoline and settle to the bottom of the tank and cause problems. The typical shelf live of E10 fuel is 90 days or less.

Ethanol can cause significant problems in many different applications due to the differences in properties compared to gasoline:

Ethanol is hygroscopic, which means it has a tendency to absorb water. When ethanol absorbs water, it readily separates from gasoline and, because it is heavier, falls to the bottom of the tank. The ethanol/water mixture in the bottom of the tank degrades relatively quickly. Ethanol contains less energy per gallon compared to gasoline. Based on this, many new vehicles have computer systems that sense and correct for high ethanol content. Small engines and most power sports equipment are not programmed to detect this and a lean burn situation results. When the ethanol rich mixture is pulled into the engine this lean burn increases combustion temperatures significantly, which can lead to severe engine damage. When a mixture of water and ethanol degrades and creates gums, varnish and other insoluble debris, fuel flow passages can become narrow or plug, significantly affecting engine performance. When the correct amount of fuel cannot flow to the engine, equipment becomes difficult to start and performance becomes unstable.

So I would recommend buying fuel that does not have ethanol in it. Often the premium fuels do not. Of course there are fuel additives you can buy but I won't comment on any brand names. Some are good and some seem to be a waste of money, chose wisely. Friend owns a PS dealership and he tells me he has stocked some and found very few of them work as claimed.

Edited by ZZ71

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Mhatayas
      What should I do about this , bad oil leak where the filter cover bolts on . Can I use some gasket maker 

×
×
  • Create New...