Quantcast
Jump to content

Recommended Posts

Posted (edited)

hi i have a 06 700 kingquad and i wondering if anyone can help me the bike is missing if you take off to fast and once your up to 80 or so and hit the throttle it will stall the exhaust is also getting red from the head back to the muffler tip i have changed the battery took the tank off and cleans the pump cheaked for broken wires and cant find anything also it runs around 13 volts with no lights on but when there on it will drop all the way down to 8-9 could the be the statior or regulator and has anyone ever had the throttle posion going bad i wonder if that is causing the miss in the injuctor but if anyone has any of these problem i would like to know if there is a easy fix befor i start buying parts thanks

Edited by littlemac
Posted

That quad should be fuel injected. Have you checked your air filter for clogging. At high rev, you need allot of airflow.

* Changed your thread title, included year, make, and issue.

Posted (edited)

I am inclined to agree with Ajmboy, it sounds like you aren't burning enough of the fuel in the combustion cycle, so it burns off in the exhuast making it get hot like that. A clogged air cleaner seems like the most likely thing to me as well. It would explain the stumbling in performance too. Check the air cleaner first, but if that is not the problem, I would check the throttle position sensor next. Also, there may be a sensor inside your air box, it is an air temp. sensor, that could be causing problems too. There is also an air pressure sensor on the throttle body, if that isn't reading properly, it will affect fuel delivery. I assume that the engine temp. light is not coming on, right?

Edited by DirtDemon

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hfrost112
      whats the best way to seal the bead on a tire
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By mmikesell
      First post here need some help/advice. I bought a 2001 king quad 300, vin number JSAAK43A212111871. I have been trying to do some basic maintenance as it runs but doesn't idle all that well . I want to take out and clean/repair the  carb but when looking for parts it ask for model X Y K1 K2. How do I know which model I have? I have tried some vin decoders but they haven't told me. If anyone could recommend a carb rebuild kit for my quad Id appreciate it. Also any tips on tracking down an owners manual? 
×
×
  • Create New...