Quantcast
Jump to content

Recommended Posts

Posted

January/February 2010 ATV Photo Contest

* We are extending January's contest into February for everyone dud to the fact that the community has been offline the last day of January through the first week of February, because of technical issues.

Theme: "Best Modified From Original" with your ATV, 3 wheeler, or UTV."

"Best Modified From Original" is basically anything that makes your machine different from factory (OEM) original. This could be addons, mechanical modifications, graphics, exterior accessories (luggage, winches, grips, ...), tires, etc...

Prize: UTVlifeSTYLE Magazinenew.gif & UTVOffroad Magazine (1 year subscriptions)

utvlifestyle.jpg

Rules: Submit your ""Best Modified From Original" with your ATV, 3 wheeler, or UTV." by entering it with a post, into this thread. (If you are not familiar with how to do this, visit the Learning Center) One photo per member allowed, so make sure it's a winner. You may submit photos that have not won past contests. Photos can be of yourself or taken by you. You may not submit photos that you do not have ownership of or permission to use. Any violation of these terms will result in disqualification.

NOTE: You MUST have a minimum post count of 10 to enter into the contest! We would like to see participation in our forums from all members who enter the contest.

Last day to enter a photo is February 24th.

Voting will take place for the last 4 days of February to determine the winner.

Voting will end February 28th and the winner will be announced!

Good Luck!

Posted
I think you were talkin about my baby....

Thanks man 7 years in the making. I want to get a huge collection of trikes someday=a 200X,350X,86250R,Tecate,bigred+ *GO+SHOW*

WHERE ARE THE CUSTOM ATV'S AT?????

I'm waiting to see if I have any more new parts coming.

Posted

I love the trike man! Very nicely done!

P.S. Don't mean to put a damper on things but the rules say "One photo per member allowed"

Just thought I would let you know so you don't disqualify a very nice trike!

Posted

OK I'm in on this contest, not the best but I finally have a setup I like.

5303-AC-650-H1.jpg

Trail: Mud Lite XTR 27x9-12 Front and 27x11-12 Rear / Mud: Highlifter Outlaws 29.5x12-12 Front and Rear

Sway Bar, Hockey Puck Mod, EBC Brakes and Rotors, 2" Snorkel, Black Magic Slip On, Exhaust Snorkel, Airdam Machined Primary, D Ring Tow Hook and Strap

Auto Meter Temp and Volt Gauge, All Balls Wheel Bearings and Tie Rods, 4" PIAA Lights, Super-Bright Red LED Taillight Bulb

F-1600: Tamarack Classic ATV Front Box w/ Speedrack Quick Release, Custom Graphics by Arctic FX, Hunter Green PowerMadd Star Series Handguards

Herculiner on Racks, Bumpers, Snorkels, and Box, Circuit Breaker for Fan and Main, Coolant Overflow Tank Vented Near Pod, One-way Valve on Carb Drain

60-IN. AC Plow Blade - Modified, Remote Angle Control, and Winter Front

Posted (edited)

I'm in. Here's mine:

5549-Bonestroo-Jump.jpg

LSR +3 LT A-Arms

Elka triple rate shocks

Blingstar Iron cross Bumper

Pro Taper Bars

ITP Rims

ITP XCT Tires

ODI Lock on Grips (love those things)

twin air filter

AC Nerfs

+3 rear axle

WB full Exhaust

HRC Cam kit

Pro Armor teather kill switch

Braided Brake Lines

13 tooth front

Twin Air Filter

and a bunch of other stuff that I can't remember at the moment

Edited by KFx400jim
Posted

Here is my '02 Honda Recon. I call it my "Budget" ATV since I'm trying to keep my mods cheap! I wish I could post two pictures to show you a before and after, but here is a pic of it today. I was wanting something mainly that I could take deer hunting and play around on. When I traded for it a month ago, it was bone stock, bald tires, "PINK" handlebar grips,:aargh: rusty racks, no brakes, etc. Since then, I've fixed the brakes, added a 2" lift, added 1.5" wheels spacers, painted all the racks, got some black handle bar grips, added a 2,000 lb winch, added a camo rear pack/padded seat, and 25" wheels and tires from a Honda Foreman. I was glad to find the wheels and tires locally for $125. They were like brand new and bigger than stock. I modified a snow plow I found laying around from a lawn mower to clean off my driveway. It's not fancy, but save my back from scooping snow! All in all, I have about $1,500 in it total. :biggrin:

utf-8BSU1HMDA5NDYuanBn-1-1.jpg

Posted (edited)

Banshee.jpg

98 Banshee

Coolhead w/ 20cc domes

Wiseco pistons

Vforce 3 reeds

Aggressive dune ported

CPI inframe drag pipes

Timing plate +4 degrees

Aluminum waterpump

Hinson clutch basket with hd springs (lockup in the future)

Modified shift star

Maier plastic, cut front and raptor style rear (soon to be cut)

+6 swinger

+4 axle

+2+1 arms

Stainless brake lines front and rear

Wave rotors front and rear

Pro taper bars

Duncan bumper

Trailtech lights (not on in this pic just got them on before our last dune trip)

21 inch 8pdl haulers and mowhawk fronts on douglas blue lables for the sand

18 rear and 19 front mx claws on douglas red lables for the dirt

lots of powdercoated and polished parts

Edited by jigolbeep
Posted

I was thinking about entering this contest, but I can't decide which ride to enter, it's either the CR 500 powered TRX 250R, or the Tri-moto 125 recliner. The quad is complete, but the recliner still has alot of work to be done, so I don't know if it really counts yet.

Posted
I feel like an outcast with a Utility ATV, I thought there would be more for sure.

The trikes are sick I am definately voting for one of them.

You are no outcast....:wink: I'm a utility rider myself.

Posted (edited)

Dude that is sick!!! i would love to ride it. would like to have one but not going to cut up my TRX450. Where did you get you front sprocket retainer, got to have one!

Edited by quadracer69

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
    • By Arizona
      I recently bought a 87 TRX 250 not running of course, the owner had a brand new Key Switch on it.
      I think it is the wrong one or wrong wire colors as the colors dont match up with wiring diagram i downloaded for it. 
      anyone have a pic of their ign switch wires where they connect with the wire colors for that model? I ended up leaving the black/w stripe and
      green wire disconnected in order to hot wire it for other testing but would like to know as the colors dont match diagram. 


    • By Ejwill
      Well while I was waiting for new parts for the choke, I decided to adjust the clutch. When I removed the lock nut, I found the guy I bought it from or someone else had stripped the threads on the adjustment rod. I couldn’t get the adjustment rod to turn without putting a pair of channel locks on the screw driver, this was telling me something was wrong. So now the rod pushes in and out and spins freely too freely. So guess I’ll have to take the clutch housing off to see what’s going on and replace the adjustment rod, it’s threads are beyond repair, and there is something going on with the adjustment rod. If there’s another way please let me know. The further I go the worse it gets. Thanks for any help.



×
×
  • Create New...