Quantcast
Jump to content

Recommended Posts

Posted

have a 95 warrior and was just rippin it in the snow and i wasnt getting very far with my itp holeshots, any suggestions?? looking for a tire rim combo not 2 expensive unless its a last resort

thanks

Posted

Paddles are the best way to go for deep snow IMO. If you are riding on hard packed snow, the best thing to do is take an old set of tires, drill small holes and put bolts through them. Make sure to use lock nuts and put washers on both sides. Then put some tire slime inside and ride around to help seal them up.

Posted
Paddles are the best way to go for deep snow IMO. If you are riding on hard packed snow, the best thing to do is take an old set of tires, drill small holes and put bolts through them. Make sure to use lock nuts and put washers on both sides. Then put some tire slime inside and ride around to help seal them up.

That's a good idea and a nice way to stud your own tires!!!

Posted
have a 95 warrior and was just rippin it in the snow and i wasnt getting very far with my itp holeshots, any suggestions?? looking for a tire rim combo not 2 expensive unless its a last resort

thanks

go with four snows there cheaper but i peferr pro wedges #2 on duglouas blue lable.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
    • By hfrost112
      whats the best way to seal the bead on a tire
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
×
×
  • Create New...