Quantcast
Jump to content

Recommended Posts

Posted

issues with a/c 2005 500 4x4 atv, will not idle,back fires and bogs out when throttle is touched,have to keep pumping throttle to keep running--- things done dealer rebuilt carb- i changed air filter ,plug, changed gas, this machine has 45 hours on it. any ideas would be helpful

Posted

welcome to quadcrazy...you said "will not idle,back fires and bogs out when throttle is touched,have to keep pumping throttle to keep running"

a little thrown off by this..so when you say pump the throttle are you referring to pumping the throttle prior to starting or while it is running? Also did you bring it to the dealer with this problem or after they serviced it did you have this problem?

My best guess from the info you have the engine is being starved of fuel and the carb needs to be adjusted. Probably the wrong fuel to air ratio,,,but thats a maybe not totally sure yet

Posted

sorry if i wasnt clear, ..issue started like this- was driving and it acted like i was running out of gas--had to keep pumping throttle to keep it running...got it home noticed gas running out of bottom of carb on to engine.so i took carb off(figured stuck float),cleaned carb and put back on ,stopped the gas from running out bottom but still ran the same. so figured carb issue,,,,took carb to dealer- they rebuilt,,,tested carb--said carb works perfect....so i put back on,,,still ran the same,,,still have to keep pumping throttle to stay running....so i changed plug,airfilter..still no change...the point im at now is..will start after pumping the throttle couple times,,,will idle.but as soon as i touch throttle it tries to die and back fires. but if i pump the throttle faster and faster it will pick up and run ????????

Posted

I would start by checking to make sure gas it getting to the carb, check the fuel lines and petcock. Then I would check the folowing things if you are still having problems; ignition timing, valve lash, timing chain, flywheel key, coil, coil wire, plug cap and CDI.

Posted

****fixed***** WELL ENDED UP TAKEN IT TO A DIFFERNT REPAIR SHOP,COST ME 200$ TO FIND OUT THE DEALER I TOOK CARB TO- PUT THE CARB BACK TOGETHER WRONG. SO NOW IM BACK UP AND RUNNING...THANKS FOR ALL THE REPLYS AND SUGGESTIONS.

Posted
****fixed***** WELL ENDED UP TAKEN IT TO A DIFFERNT REPAIR SHOP,COST ME 200$ TO FIND OUT THE DEALER I TOOK CARB TO- PUT THE CARB BACK TOGETHER WRONG. SO NOW IM BACK UP AND RUNNING...THANKS FOR ALL THE REPLYS AND SUGGESTIONS.

I would take a reciept from the second repair back to the first dealer and DEMAND that they refund your money.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
×
×
  • Create New...