Quantcast
Jump to content

Recommended Posts

Posted (edited)

I have a scrambler 400 and it will not go forward. Reverse works fine but when i shift it into forward it just sits there, it just happened the other day, up until then it ran fine. Any ideas where to start trouble shooting or what is wrong?

Edited by bigblue
Posted

Can you hear it click into gear and are your shift lights working? I have the 98 xplorer 400L but i am assuming they are a lot alike. Mine was messing up and I had to adjust the shift rods from the gear shift to the transmission. Worked perfect after adjustment. I would check there first.

Posted

Is there any grinding when you try to shift into forward. I have that problem on my polaris and I had to fix the gears that had worn down. If there is no grinding and you are pushing into gear hard then something might be loose in the shifter.

Posted

check your shifting linkage...i have a similar problem with my 94 polaris... if you do hear a grinding when you go into reverse or any gear and you need to force it you need to lower you rpms...there is a screw on your carb that allows you to do that

Posted

I agree that you need to check your linkage, if you hear it going into gear with a "click" then it is deeper than linkage and you need to check your gears in your tranny. If you are not confident in your skills then I would recomend taking it to your local shop because the Polaris tranny can sometimes be diffucult if you are unsure what is wrong with it.

  • 5 months later...
Posted
I have a scrambler 400 and it will not go forward. Reverse works fine but when i shift it into forward it just sits there, it just happened the other day, up until then it ran fine. Any ideas where to start trouble shooting or what is wrong?

The linkage might need readjusted. Check out mine at atvwheelin.com there are other tech tips there too.:wink:

  • 3 weeks later...
Posted

Yeah,i'm takin mine apart today,Brother-in law had idle up about 1,000 R's too much. terrible forward engagment. hopefully just three parts $200 or less.,,,,,,,,,,,,,,,,,,,,,,,,,,,

  • 1 year later...
Posted

Its all a guess till you crack it open...Dog gear or silent chain would be my guess. if it grinds most likley the chain if your hear nothing broken dog gear..still just a guess.

Good luck PolarisATVrepair.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Tinkeringreg
      Hi my name is Greg and I just acquired a free 2000 yamaha kodiac 400 4x4 with the ultramatic transmission that does not run. I plan to get it going and use it around my property

    • By Travis_Smith
      I have a 2002 Kawasaki Prairie KVF 400 and im trying to figure out the actual float height... i have read 17mm +- 2mm, seen 13mm and 23mm... what is happening is it will start right up, rev a little and all is fine, when it warms and you put a load on it bogs down and sputters. no i don't have a manual
×
×
  • Create New...