Quantcast
Jump to content

Recommended Posts

Posted

Well yesterday we had the last Palmer's Mud Bash for this year, and turned out ok. Well better for me =D

Well yesterday me, and my dad left about 6am from home, and got there about 7:30-ish I think. Since it rained thursday, and friday it was really muddy that day. So had a nice coat of mud on the ATV,me, and a lucky guy asked for a ride LOL...

Worked at the front gates mostly all day besides goofing off for few breaks since they werent doing anything at the front gates so took some pictures, and after I took these I wished I took some better close up pictures on some.

.

Few other mud run thread's

Palmer's Farm Mud Bash *8-01-09*

KC's Evo2 Place

Palmer's Farm Mud Bash *4-04-09*

KC's Evo2 Place

Palmer's Farm Mud Bash *10-11-08*

KC's Evo2 Place

.

Ahh nice coat of mud after lunch. Was the most muddy ATV there.

cid1010095219.jpg

Ok tell me whats missing on this truck lol.. When they pulled up today. I couldnt help but laugh . I didnt noticed it until I was marking the front window, and was going to check if they got a cooler in back.

cid1010091219.jpg

Here they was doing 50/50, and giving away few stuff on top of that tractor lol.... Giving away a car radio,shirts,hats,stickers, and some other stuff.

cid1010093149.jpg

cid1010096319.jpg

cid1010094129.jpg

cid1010097543.jpg

cid1010096436.jpg

cid1010095653.jpg

cid1010095632.jpg

I find this kind funny because where the ford is sitting is where it got stuck at lol...

cid1010095213.jpg

cid1010096349.jpg

cid1010098619.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By qcm413
      Hi,
       
      i need to replace my tire on my atv and i want to know if somebody have a good tire experience on mid-mud terrain and winter plowing. im not sure if i am to go with a tile like a tractor thread or the other ones like ITP mud lite
      thank in advance 
    • By DaleJAM
      so i cant read the vin clearly but i have added some pictures, hopefully someone sees it correctly. took a picture of what it looks like, they painted it Green It is underside a SKY BLUE original. has one spark plug . 3 relays in the back + rectifier. has one relay in the front. has cdi in the front three plugs off it. 
      If you need more info or pictures please ask. 
      the wire harness is trashed i want to rewire it but correctly. 






    • By davefrombc
      COVID, record heat wave,  fires,  floods, deep freeze and more fires. Good riddance 2021.  Have a Safe and very  HAPPY NEW YEAR everyone.  May 2022  make up  for the trials  of the last 2
    • By DaveswMN
      Pulled my '86 Moto4 out of shed where it sat for 20 years. I knew it smoked. checked it over a little put in gas and it fired right up!! 
      Drove about 100 yards, ran about half throttle wouldn't idle.  Put on somenew parts, jug/piston and rings, carb and valve seals.
      'went together ok, tuned it over by hand about 6 revs whick went well. Hit the starter it fired for about 6 revs and quit. tried it again fired once and then th sound of something slipping like maybe chain slipping over spoket.
      Took cover off to watch cam sproket, hit starter again, heard same noise and the cam sproket was not turning but jumping a bit. Chain was still tight. You will probably tell me I need to split the lower case but hoping there mightbe something else.
      I don't fully understand the chain tightener, the plunger only moves about 1/4 inch, should it move much more than that when off the motor and compressing it by hand?
      Thanks for any thoughts.
×
×
  • Create New...