Quantcast
Jump to content

2007 Suzuki Vinson 5 spd auto rattling noise


gaquad

Recommended Posts

I just purchased this machine as a brand new machine from a dealer as a left over, full warranty and 18 miles on it.

At an idle you can hear a rattling noise which is disturbing to a person who used to be an auto mechanic. I got out my stethoscope (pry bar up to my ear) and the sound appears to be coming from the rear part of the transmission where the clutch basket would be. I read somewhere else on the internet that its the bevel gear and its normal and I just want to make sure. My machine is still under warranty so I can take it back if needed but if anyone with a Vinson can verify that their machine is/was making the same noise I will feel better about it and may still take it to the shop for an inspection.

So far I am very happy with the machine, the handling is great, the power is more than what I need and its ability to go just about anywhere its wheels are pointed are all pluses for me. Last weekend I pulled out 2 swamped quads at the same time so it has some pulling power in low range. My only complaint so far was the rear brake squeaking which I have seemed to fix by disassembling the rear brake and applying anti-seize to the contact points on the caliper for the brake pads. If I had to complain about one more thing it would be the the gear ratio in reverse, its just not as low as I would like and it does not get lower even in low range.

Link to comment
Share on other sites

Thanks for the quick reply. I think you offered the best suggestion.

I understand that the cluch basket is most likely a bevel cut gear which could cause a slapping against the Inner bearing mating surface at an idle, especially a rather large engine single cylinder at that...not the smoothest engine by any means or not like a vtwin.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By ForumIdiot
      Hi, Im dudeman, Trying to get 10 post just to download a pdf. (By the way, how does this not junk the forum up with random post of useless info just to get a download?)
    • By exalrod
      Hello All !
      I am looking for a service manual and wiring diagram for a 2005 50cc Polaris Predator 4 wheeler.
      Could anyone help with this?
    • By pitts
      Just joined so I can download a manual and In the process of making my 10 posts.
    • By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
×
×
  • Create New...