Quantcast
Jump to content

Recommended Posts

Posted

Need help to start what i have done new piston and cylinder bored crank seal plugs carb kit (Had bad piston when bought atv) problem I have no power runs rough and smokes have 110 compression looks like good fire stator is in correct position just dont know how to tell if there is a carb issue any help?

Posted

Compression sounds right on. Does it run any different with choke on or off? Did you premix the first tank of gas? Smoking sounds like maybe too much oil (if its excessive). Also, what does the plug look like if you can keep it running for a few minutes.

Posted

What color is the smoke? What does it smell like? What does the spark plug look like. You could be leaking oil into the crankcase because of an improperly installed crank seal, or a leak between the case halves. Or you could be leaking water into the cylinder through the head gasket or cylinder base gasket. Make sure all your bolts and nuts are properly torqued. You could just be getting too much oil from the oil injection. Also, check your timing and flywheel key. Also, I'm not exactly sure what the compression should be, but 110 seems a little low for a fresh piston and bore, but it still shouldn't run poorly. Did you do the compression test when the motor was warm or cold?

Posted

Black smoke usually means you are running way too rich, the fact that you say it dies when you choke it, supports that idea. You may be jetted way too rich, or you may have a clogged air cleaner. Also, I am pretty sure that machine has an oil injection system for the 2-stroke mix. Unless that system has been properly bypassed, you should not be running a pre-mix, just add oil to the oil tank and gas to the gas tank.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      This topic is being opened to discuss the feasibility of forced induction on small engines.
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By Ajmboy
      So we are almost a month into winter and I've been so busy working on my house that up until today, I didn't realize that we just haven;t gotten any real snow yet to warrant putting the plow on my grizzly. So that got me thinking, what are the latest plows out there and what ATV plows are the best? I've got 2 snow plows for my grizzly, a quadboss pile driver atv plow set up and a snowsport ATV plow. They are both a bit dated now and I tend to stick with the snowsport due to ease of use and I just like it so much. So if you have a plow on your ATV, please let us know what it is and post a picture with your atv/plow would be awesome. Would also like to know what you like and dislike about it.
      This is back a while when I did a write up on these 2 plows.... in 2009 I got the snowsport and in 2012 I got the quadboss.
       
×
×
  • Create New...